Thermo- and pH-Responsive Behavior of Poly(N-isopropylacrylamide)-Block-Poly[(2-dimethylamino)ethyl Methacrylate]

Noverra Mardhatillah Nizardo(1*), Rida Hasna Fadhilah(2), Ivandini Tribidasari Anggraningrum(3)

(1) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Indonesia, Kampus UI, Depok 16424, Indonesia
(2) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Indonesia, Kampus UI, Depok 16424, Indonesia
(3) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Indonesia, Kampus UI, Depok 16424, Indonesia
(*) Corresponding Author


The influence of poly(2-dimethylamino)ethyl methacrylate (PDMAEMA) block on the thermo- and pH-responsive behavior of poly(N-isopropyl acrylamide)-block-poly[(2-dimethylamino)ethyl methacrylate)] (PNIPAM-b-PDMAEMA) was studied. The block copolymers were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization by varying the chain length of the second block (PDMAEMA). 1H-NMR and FTIR spectra confirmed the formation of block copolymers PNIPAM21-b-PDMAEMA2 and PNIPAM21-b-PDMAEMA7 with the corresponding molar masses from the GPC data. Thermo- and pH-responsive behavior of block copolymers was investigated in phosphate buffer with various pHs. Interesting results showed that the hydrophilic carboxyl end group and the hydrophobic dodecyl end group of the RAFT agent affected the resulting phase transition temperature (Tc), while the Tc was found to be low in the acidic environment. Moreover, larger particle sizes of PNIPAM21b‑PDMAEMA2 were found with a pH of 9. It is noteworthy, that the resulted block copolymers might have the potential use in a drug delivery system.


block copolymer; PNIPAM; PDMAEMA; thermo-responsive polymers; pH-responsive polymers

Full Text:

Full Text PDF


[1] Kocak, G., Tuncer, C., and Bütün, V., 2017, pH-Responsive polymers, Polym. Chem., 8 (1), 144–176.

[2] Madhusudana Rao, K., Mallikarjuna, B., Krishna Rao, K.S.V., Siraj, S., Chowdoji Rao, K., and Subha, M.C.S., 2013, Novel thermo/pH sensitive nanogels composed from poly(N-vinylcaprolactam) for controlled release of an anticancer drug, Colloids Surf., B, 102, 891–897.

[3] Suka, I.G., and Simanjuntak, W., 2011, Preparation of temperature-responsive polymer by grafting of N-isopropylacrylamide (NIPAAM) onto solid waste cassava, Indones. J. Chem., 11 (1), 9–15.

[4] Ningrum, E.O., Purwanto, A., Rosita, G.C., and Bagus, A., 2020, The properties of thermosensitive zwitterionic sulfobetaine NIPAM-co-DMAAPS polymer and the hydrogels: The effects of monomer concentration on the transition temperature and its correlation with the adsorption behavior, Indones. J. Chem., 20 (2), 324–335.

[5] Jha, A., Rama, A., Ladani, B., Verma, N., Kannan, S., and Naha, A., 2021, Temperature and pH-responsive nanogels as intelligent drug delivery systems: A comprehensive review, J. Appl. Pharm. Sci., 11 (12), 001–016.

[6] Nizardo, N.M., Alimin, D.F., and Lestari, M.L.A.D., 2022, Synthesis and characterization of dual-responsive poly(N-vinylcaprolactam-co-N-methylolacrylamide) nanogels, Des. Monomers Polym., 25 (1), 155–164.

[7] Ward, M.A., and Georgiou, T.K., 2011, Thermoresponsive polymers for biomedical applications, Polymers, 3 (3), 1215–1242.

[8] Göktaş, M., and Deng, G., 2018, Synthesis of poly(methyl methacrylate)-b-poly(N-isopropylacrylamide) block copolymer by redox polymerization and atom transfer radical polymerization, Indones. J. Chem., 18 (3), 537–543.

[9] Nizardo, N.M., and Tania, T.P., 2021, The effect of poly(N-hydroxymethyl acrylamide) chain length in poly(N-vinyl pyrrolidone)-block-poly(N-hydroxymethyl acrylamide) on its sensitivity to pH, Rasayan J. Chem., 14 (4), 2671–2676.

[10] Kotsuchibashi, Y., Ebara, M., Aoyagi, T., and Narain, R., 2016, Recent advances in dual temperature responsive block copolymers and their potential as biomedical applications, Polymers, 8 (11), 380.

[11] Reyes-Ortega, F., 2014, "pH-Responsive Polymers: Properties, Synthesis and Applications" in Smart Polymers and their Applications, Eds. Aguilar, M.R., and San Román, J., Woodhead Publishing Limited, Sawston, Cambridge, 45–92.

[12] Giaouzi, D., and Pispas, S., 2020, PNIPAM-b-PDMAEA double stimuli responsive copolymers: Effects of composition, end groups and chemical modification on solution self-assembly, Eur. Polym. J., 135, 109867.

[13] Li, Q., Gao, C., Li, S., Huo, F., and Zhang, W., 2014, Doubly thermo-responsive ABC triblock copolymer nanoparticles prepared through dispersion RAFT polymerization, Polym. Chem., 5 (8), 2961–2972.

[14] Huang, Y., Yong, P., Chen, Y., Gao, Y., Xu, W., Lv, Y., Yang, L., Reis, R.L., Pirraco, R.P., and Chen, J., 2017, Micellization and gelatinization in aqueous media of pH- and thermo-responsive amphiphilic ABC (PMMA82-b-PDMAEMA150-b-PNIPAM65) triblock copolymer synthesized by consecutive RAFT polymerization, RSC Adv., 7 (46), 28711–28722.

[15] Giaouzi, D., and Pispas, S., 2020, Effects of chemical modifications on the thermoresponsive behavior of a PDMAEA-b-PNIPAM-b-POEGA triblock terpolymer, Polymers, 12 (6), 1382.

[16] Škvarla, J., Raya, R.K., Uchman, M., Zedník, J., Procházka, K., Garamus, V.M., Meristoudi, A., Pispas, S., and Štěpánek, M., 2017, Thermoresponsive behavior of poly(N-isopropylacrylamide)s with dodecyl and carboxyl terminal groups in aqueous solution: pH-dependent cloud point temperature, Colloid. Polym. Sci., 295 (8), 1343–1349.

[17] FitzGerald, P.A., Gupta, S., Wood, K., Perrier, S., and Warr, G.G., 2014, Temperature- and pH-responsive micelles with collapsible poly(N-isopropylacrylamide) headgroups, Langmuir, 30 (27), 7986–7992.

[18] Tebaldi, M.L., Leal, D.A., Montoro, S.R., and Petzhold, C., 2014, Synthesis of stimuli-sensitive copolymers by RAFT polymerization: Potential candidates as drug delivery systems, Mater. Res., 17 (Suppl. 1), 191–196.

[19] Farooqi, Z.H., Butt, Z., Begum, R., Khan, S.R., Sharif, A., and Ahmed, E., 2015, Poly(N-isopropylacrylamide-co-methacrylic acid) microgel stabilized copper nanoparticles for catalytic reduction of nitrobenzene, Mater. Sci.-Pol., 33 (3), 627–634.

[20] Ilić-Stojanović, S., Nikolić, L., Nikolić, V., Petrović, S., Oro, V., Mitić, Ž., and Najman, S., 2021, Semi-crystalline copolymer hydrogels as smart drug carriers: In vitro thermo-responsive naproxen release study, Pharmaceutics, 13 (2), 158.

[21] De Jesús-Téllez, M.A., Sánchez-Cerrillo, D.M., Quintana-Owen, P., Schubert, U.S., Contreras-López, D., and Guerrero-Sánchez, C., 2020, Kinetic Investigations of quaternization reactions of poly[2-(dimethylamino)ethyl methacrylate] with diverse alkyl halides, Macromol. Chem. Phys., 221 (9), 1900543.

[22] Göktaş, M., 2020, Synthesis and characterization of temperature-responsive block copolymers using macromonomeric initiator, Chem. Pap., 74 (7), 2297–2307.

[23] Song, T., Zhu, Y., Liang, S., Zou, G., and Zhang, Q., 2018, Coordinate bond breaking induced by collapse of poly(N-isopropyl acrylamide) as ligands of a rare earth complex, Chin. J. Chem. Phys., 31 (5), 677–683.

[24] Kwon, Y., Choi, Y., Jang, J., Yoon, S., and Choi, J., 2020, Nir laser-responsive PNIPAM and gold nanorod composites for the engineering of thermally reactive drug delivery nanomedicine, Pharmaceutics, 12 (3), 204.

[25] Chen, J., Liu, M., Gao, C., Lü, S., Zhang, X., and Liu, Z., 2013, Self-assembly behavior of pH- and thermo-responsive hydrophilic ABCBA-type pentablock copolymers synthesized by consecutive RAFT polymerization, RSC Adv., 3 (35), 15085–15093.

[26] Philipps, K., Junkers, T., and Michels, J.J., 2021, The block copolymer shuffle in size exclusion chromatography: The intrinsic problem with using elugrams to determine chain extension success, Polym. Chem., 12 (17), 2522–2531.

[27] St Thomas, C., Maldonado-Textle, H., Cabello-Romero, J.N., Macossay, J., Zhang, X., Esturau-Escofet, N., and Guerrero-Santos, R., 2014, New dialkoxyamine-trithiocarbonate for the synthesis of multiblock copolymers through in tandem RAFT/NMP, Polym. Chem., 5 (8), 3089–3097.

[28] Moad, G., Rizzardo, E., and Thang, S.H., 2008, Radical addition-fragmentation chemistry in polymer synthesis, Polymer, 49 (5), 1079–1131.

[29] Zhang, Q., Weber, C., Schubert, U.S., and Hoogenboom, R., 2017, Thermoresponsive polymers with lower critical solution temperature: From fundamental aspects and measuring techniques to recommended turbidimetry conditions, Mater. Horiz., 4 (2), 109–116.

[30] Pasparakis, G., and Tsitsilianis, C., 2020, LCST polymers: Thermoresponsive nanostructured assemblies towards bioapplications, Polymer, 211, 123146.

[31] Jain, K., Vedarajan, R., Watanabe, M., Ishikiriyama, M., and Matsumi, N., 2015, Tunable LCST behavior of poly(N-isopropylacrylamide/ionic liquid) copolymers, Polym. Chem., 6 (38), 6819–6825.

[32] Samsonova, O., Pfeiffer, C., Hellmund, M., Merkel, O.M., and Kissel, T., 2011, Low molecular weight pDMAEMA-block-pHEMA block-copolymers synthesized via RAFT-polymerization: Potential non-viral gene delivery agents, Polymers, 3 (2), 693–718.

[33] Zhou, J., Wang, L., Zha, X., and Wang, H., 2020, Synthesis of pH-responsive block copolymer micelles via RAFT polymerization induced self-assembly and its application in emulsifier-free emulsion polymerization, Phosphorus, Sulfur Silicon Relat. Elem., 195 (2), 131–141.


Article Metrics

Abstract views : 1162 | views : 1032

Copyright (c) 2023 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Analytics View The Statistics of Indones. J. Chem.