Effect of Calcium Carbonate Content on the Mechanical and Thermal Properties of Chitosan-Coated Poly(urethane) Foams

https://doi.org/10.22146/ijc.72135

Elvi Kustiyah(1), Achmad Nandang Roziafanto(2), Majid Amrullah(3), Dedi Priadi(4), Mochamad Chalid(5*)

(1) Department of Metallurgical and Material Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia
(2) Department of Metallurgical and Material Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia
(3) Department of Metallurgical and Material Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia
(4) Department of Metallurgical and Material Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia
(5) Department of Metallurgical and Material Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia
(*) Corresponding Author

Abstract


In this work, the effect of chitosan and CaCO3 coating on polyurethane (PU) foam on the mechanical and thermal properties was studied. PU-foams were soaked in a mixture of chitosan- calcium carbonate solution at different concentrations, i.e., 0.1–0.4%. The molecular behaviors due to the incorporation of chitosan/CaCO3 into the PU-foam matrix were investigated by Fourier-Transform Infrared (FTIR) spectroscopy. Field Emission Scanning Electron Microscope (FE-SEM) was utilized to study the effect of chitosan/CaCO3 coat on the pore structure of PU-foam. FTIR spectra show changes in the peak of 1446 and 1413 cm–1, which serve as evidence of molecular interaction between PU and chitosan/CaCO3. FE-SEM images show that the addition of chitosan/calcium carbonate cells was starting to close together, probably due to the increased dispersion of calcium carbonate on the entire surface of PU-foams/chitosan, which indicates that reducing the size of the cell will increase mechanical properties. From this study, it was found that PU-foam soaked in 0.4% CaCO3 had the highest tensile strength. Coating PU-foam with 0.4% CaCO3 also improved its thermal stability, indicated by an increase in its residual mass compared to neat PU-foam.

Keywords


coating; polyurethane; chitosan; calcium carbonate

Full Text:

Full Text PDF


References

[1] Gama, N.V., Ferreira, A., and Barros-Timmons, A., 2018, Polyurethane foams: Past, present, and future, Materials, 11 (10), 1841.

[2] Dolgopolsky, I., and Duley, J.A., 2000, Polyurethane foam as an integral “core” component of automotive headliner, J. Ind. Text., 30 (1), 26–41.

[3] Kustiyah, E., Putra, D.S., Gerry, D., Firdaus, D.F., and Chalid, M., 2020, Effect of lignin content as bio-chain extender in polyurethane foam, Macromol. Symp., 391 (1), 1900153.

[4] Cain, A.A., Plummer, M.G.B., Murray, S.E., Bolling, L., Regev, O., and Grunlan, J.C., 2014, Iron-containing, high aspect ratio clay as nanoarmor that imparts substantial thermal/flame protection to polyurethane with a single electrostatically-deposited bilayer, J. Mater. Chem. A, 2 (41), 17609–17617.

[5] Kara, F., Aksoy, E.A., Yuksekdag, Z., Hasirci, N., and Aksoy, S., 2014, Synthesis and surface modification of polyurethanes with chitosan for antibacterial properties, Carbohydr. Polym., 112, 39–47.

[6] Javaid, M.A., Khera, R.A., Zia, K.M., Saito, K., Bhatti, I.A., and Asghar, M., 2018, Synthesis and characterization of chitosan modified polyurethane bio-nanocomposites with biomedical potential, Int. J. Biol. Macromol., 115, 375–384.

[7] Nik Pauzi, N.N.P., Majid, R.A., Dzulkifli, M.H., and Yahya, M.Y., 2014, Development of rigid bio-based polyurethane foam reinforced with nanoclay, Composites, Part B, 67, 521–526.

[8] Dewi, R., Nasrun, Zulnazi, Riza, M., and Agusnar, H., 2019, Improved mechanical and thermal properties of modified thermoplastic starch (TPS) from sago by using chitosan, Pertanika J. Sci. Technol., 27 (3), 1441–1450.

[9] Centenaro, G.S.N.M., Facin, B.R., Valério, A., de Souza, A.A.U., da Silva, A., de Oliveira, J.V., and de Oliveira, D., 2017, Application of polyurethane foam chitosan-coated as a low-cost adsorbent in the effluent treatment, J. Water Process Eng., 20, 201–206.

[10] Carosio, F., Ghanadpour, M., Alongi, J., and Wågberg, L., 2018, Layer-by-layer-assembled chitosan/phosphorylated cellulose nanofibrils as a bio-based and flame protecting nano-exoskeleton on PU foams, Carbohydr. Polym., 202, 479–487.

[11] Bartczak, Z., Argon, A.S., Cohen, R.E., and Weinberg, M., 1999, Toughness mechanism in semi-crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles, Polymer, 40 (9), 2347–2365.

[12] Ge, C., and Aldi, R., 2014, Effects of aragonite calcium carbonate on barrier and mechanical properties of a three-layer co-extruded blown low-density polyethylene film, J. Plast. Film Sheeting, 30 (1), 77–90.

[13] Zhang, S., and Gonsalves, K.E., 1995, Synthesis of calcium carbonate–chitosan composites via biomimetic processing, J. Appl. Polym. Sci., 56 (6), 687–695.

[14] Zawadzki, J., and Kaczmarek, H., 2010, Thermal treatment of chitosan in various conditions, Carbohydr. Polym., 80 (2), 394–400.

[15] Yang, C., Wang, M., Xing, Z., Zhao, Q., Wang, M., and Wu, G., 2018, A new promising nucleating agent for polymer foaming: Effects of hollow molecular-sieve particles on polypropylene supercritical CO2 microcellular foaming, RSC Adv., 8 (36), 20061–20067.

[16] Chalid, M., Heeres, H.J., and Broekhuis, A.A., 2015, Structure-mechanical and thermal properties relationship of novel γ-valerolactone-based polyurethanes, Polym.-Plast. Technol. Eng., 54 (3), 234–245.

[17] de Moura, A.P., da Silva, E.H.P., dos Santos, V.S., Galera, M.F., Sales, F.C.P., Elizario, S., de Moura, M.R., Rigo, V.A., and da Costa, R.R.C., 2021, Structural and mechanical characterization of polyurethane-CaCO3 composites synthesized at high calcium carbonate loading: An experimental and theoretical study, J. Compos. Mater., 55 (21), 2857–2866.

[18] Reig, F.B., Adelantado, J.V.G., and Moya Moreno, M.C.M., 2002, FTIR quantitative analysis of calcium carbonate (calcite) and silica (quartz) mixtures using the constant ratio method. Application to geological samples, Talanta, 58 (4), 811–821.

[19] Dinararum, R.R., Permana, D., and Atmaja, L., 2016, Effect of calcium carbonate as filler at the chitosan/calcium carbonate composite membrane, IPTEK J. Proc. Ser., 1, 153–154.

[20] Zuo, D.Y., Tao, Y.Z., Chen, Y.B., and Xu, W.L., 2009, Preparation and characterization of blend membranes of polyurethane and superfine chitosan powder, Polym. Bull., 62 (5), 713–725.

[21] Chuayjuljit, S., Maungchareon, A., and Saravari, O., 2010, Preparation and properties of palm oil-based rigid polyurethane nanocomposite foams, J. Reinf. Plast. Compos., 29 (2), 218–225.

[22] Stirna, U., Fridrihsone, A., Lazdina, B., Misāne, M., and Vilsone, D., 2013, Biobased polyurethanes from rapeseed oil polyols: Structure, mechanical and thermal properties, J. Polym. Environ., 21 (4), 952–962.

[23] Mazraeh-shahi, Z.T., Shoushtari, A.M., Bahramian, A.R., and Abdouss, M., 2015, Synthesis, pore structure and properties of polyurethane/silica hybrid aerogels dried at ambient pressure, J. Ind. Eng. Chem., 21, 797–804.

[24] Li, X.G., Lv, Y., Ma, B.G., Wang, W.Q., and Jian, S.W., 2013, Decomposition kinetic characteristics of calcium carbonate containing organic acids by TGA, Arabian J. Chem., 10 (Suppl. 2), S2534–S2538.

[25] Barikani, M., Honarkar, H., and Barikani, M., 2009, Synthesis and characterization of polyurethane elastomers based on chitosan and poly(e-caprolactone), J. Appl. Polym. Sci., 112 (5), 3157–3165.



DOI: https://doi.org/10.22146/ijc.72135

Article Metrics

Abstract views : 2659 | views : 2303


Copyright (c) 2022 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web
Analytics View The Statistics of Indones. J. Chem.