Carbon/Alginate/Chitosan Composite as a Sorbent for Solid-Phase Extraction and Preconcentration of Cu(II)
Ahmad Akhib Ainul Yaqin(1), Suherman Suherman(2), Mudasir Mudasir(3), Dwi Siswanta(4*)
(1) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(2) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(3) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(4) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(*) Corresponding Author
Abstract
Carbon/Alginate/Chitosan Composite (CAC) as a sorbent for solid-phase extraction of Cu(II) (pre-concentration) with atomic absorption spectrometry for analysis was successfully prepared. The sorbent was made with a mass ratio of chitosan:alginate:carbon = 1:1:1. CAC sorbents were characterized using FTIR for functional group analysis while SEM-EDX characterization was performed to determine surface morphology and percentage of elements. SPE parameters were optimized for adsorption-desorption efficiency under various conditions, i.e. of pH 5, Cu(II) concentration of 4 mg/L, the flow rate of Cu(II), and Na2EDTA eluent at 5 mL/min, the volume of Cu(II) sample and Na2EDTA eluent 25 mL and 1.0 M of Na2EDTA eluent concentration. Applying CAC-based SPE for Cu(II) analysis in water samples at optimum conditions gave 80.9–83.6% recovery. In bottled drinking water samples, a pre-concentration factor of 2.5–5 times was obtained, and the Cu(II) concentration of 0.017–0.020 mg/L was detected.
Keywords
Full Text:
Full Text PDFReferences
[1] Hotová, G., Slovák, V., Zelenka, T., Maršálek, R., and Parchaňská, A., 2020, The role of the oxygen functional groups in adsorption of copper (II) on carbon surface, Sci. Total Environ., 711, 135436.
[2] Ahmad, M., Zhang, B., Wang, J., Xu, J., Manzoor, K., Ahmad, S., and Ikram, S., 2019, New method for hydrogel synthesis from diphenylcarbazide chitosan for selective copper removal, Int. J. Biol. Macromol., 136, 189–198.
[3] Kayalvizhi, K., Alhaji, N.M.I., Saravanakkumar, D., Mohamed, S.B., Kaviyarasu, K., Ayeshamariam, A., Al-Mohaimeed, A.M., AbdelGawwad, M.R., and Elshikh, M.S., 2022, Adsorption of copper and nickel by using sawdust chitosan nanocomposite beads – A kinetic and thermodynamic study, Environ. Res., 203, 111814.
[4] European Union, 2014, Drinking Water Regulations, S.I. No. 122 of 2014.
[5] Andriansyah, I., Yuliantini, A., and Yunita, A.R., 2019, Analisis cemaran logam berat tembaga (Cu) pada AMDK di daerah Panyileukan dengan menggunakan SSA, JKR, 4, 89–93.
[6] Kuczajowska-Zadrożna, M., Filipkowska, U., and Jóźwiak, T., 2020, Adsorption of Cu(II) and Cd(II) from aqueous solutions by chitosan immobilized in alginate beads, J. Environ. Chem. Eng., 8 (4), 103878.
[7] Bo, S., Luo, J., An, Q., Xiao, Z., Wang, H., Cai, W., Zhai, S., and Li, Z., 2020, Efficiently selective adsorption of Pb(II) with functionalized alginate-based adsorbent in batch/column systems: Mechanism and application simulation, J. Cleaner Prod., 250, 119585.
[8] Liu, Y.X., Bian, L.C., Xia, J.R., and Cao, Q.E., 2021, A novel ion-imprinted polymer based on multi-walled carbon nanotubes for solid phase extraction of Pd(II), Chin. J. Anal. Chem., 49 (9), e21170–e21178.
[9] Quinn, C.W., Cate, D.M., Miller-Lionberg, D.D., Reilly, T., Volckens, J., and Henry, C.S., 2018, Solid-phase extraction coupled to a paper-based technique for trace copper detection in drinking water, Environ. Sci. Technol., 52 (6), 3567–3573.
[10] Maranata, G.J., Surya, N.O., and Hasanah, A.N., 2021, Optimising factors affecting solid phase extraction performances of molecular imprinted polymer as recent sample preparation technique, Heliyon, 7 (1), e05934.
[11] Wang, J., Yang, Q., Zhang, L., Liu, M., Hu, N., Zhang, W., Zhu, W., Wang, R., Suo, Y., and Wang, J., 2018, A hybrid monolithic column based on layered double hydroxide-alginate hydrogel for selective solid phase extraction of lead ions in food and water samples, Food Chem., 257, 155–162.
[12] He, Y., Gou, S., Zhou, L., Tang, L., Liu, T., Liu, L., and Duan, M., 2021, Amidoxime-functionalized polyacrylamide-modified chitosan containing imidazoline groups for effective removal of Cu2+ and Ni2+, Carbohydr. Polym., 252, 117160.
[13] Romo, I., Abugoch, L., and Tapia, C., 2020, Soluble complexes between chenopodins and alginate/chitosan: Intermolecular interactions and structural-physicochemical properties, Carbohydr. Polym., 227, 115334.
[14] Djerahov, L., Vasileva, P., Karadjova, I., Kurakalva, R.M., and Aradhi, K.K., 2016, Chitosan film loaded with silver nanoparticles–Sorbent for solid phase extraction of Al(III), Cd(II), Cu(II), Co(II), Fe(III), Ni(II), Pb(II) and Zn(II), Carbohydr. Polym., 147, 45–52.
[15] Ozcan, N., and Saloglu, D., 2020, Activated carbon embedded alginate beads for removing nonsteroidal anti-inflammatory drug naproxen from wastewater: Equilibrium, kinetics, thermodynamics, desorption, and reusability, Water Sci. Technol., 81 (7), 1432–1444.
[16] Wan, Z., and Li, K., 2018, Effect of pre-pyrolysis mode on simultaneous introduction of nitrogen/oxygen-containing functional groups into the structure of bagasse-based mesoporous carbon and its influence on Cu(II) adsorption, Chemosphere, 194, 370–380.
[17] Zhong, Q.K., Wu, Z.Y., Qin, Y.Q., Hu, Z., Li, S.D., Yang, Z.M., and Li, P.W., 2019, Preparation and properties of carboxymethyl chitosan/alginate/tranexamic acid composite films, Membranes, 9 (1), 11.
[18] Maltepe, E., Öztürk Er, E., and Bakırdere, S., 2020, Chitosan magnetic hydrogel based ligandless magnetic solid phase extraction for the accurate and sensitive determination of thallium by slotted-quartz tube flame atomic absorption spectrophotometry with matrix matching calibration strategy, Microchem. J., 158, 105231.
[19] Taher, M.A., Omer, A.M., Hamed, A.M., Ali, A.M., Tamer, T.M., and Mohy Eldin, M.S., 2019, Development of smart alginate/chitosan grafted microcapsules for colon site-specific drug delivery, Egypt. J. Chem., 62 (6), 1437–1445.
[20] Tang, S., Yang, J., Lin, L., Peng, K., Chen, Y., Jin, S., and Yao, W., 2020, Construction of physically crosslinked chitosan/sodium alginate/calcium ion double-network hydrogel and its application to heavy metal ions removal, Chem. Eng. J., 393, 124728.
[21] Tummino, M.L., Magnacca, G., Cimino, D., Laurenti, E., and Nisticò, R., 2020, The innovation comes from the sea: Chitosan and alginate hybrid gels and films as sustainable materials for wastewater remediation, Int. J. Mol. Sci., 21 (2), 550.
[22] Rahman, M.A., Islam, M.S., Haque, P., Khan, M.N., Takafuji, M., Begum, M., Chowdhury, G.W., Khan, M., and Rahman, M.M., 2020, Calcium ion mediated rapid wound healing by nano-ZnO doped calcium phosphate-chitosan-alginate biocomposites, Materialia, 13, 100839.
[23] Pan, L., Wang, Z., Zhao, X., and He, H., 2019, Efficient removal of lead and copper ions from water by enhanced strength-toughness alginate composite fibers, Int. J. Biol. Macromol., 134, 223–229.
[24] Godiya, C.B., Liang, M., Sayed, S.M., Li, D., and Lu, X., 2019, Novel alginate/polyethyleneimine hydrogel adsorbent for cascaded removal and utilization of Cu2+ and Pb2+ ions, J. Environ. Manage., 232, 829–841.
[25] Imran, K., Harinath, Y., Naik, B.R., Kumar, N.S., and Seshaiah, K., 2019, A new hybrid sorbent 2,2’-pyridil functionalized SBA-15 (Pyl-SBA-15) synthesis and its applications in solid phase extraction of Cu(II) from water samples, J. Environ. Chem. Eng., 7 (3), 103170.
[26] Su, C.K., and Lin, J.Y., 2020, 3D-Printed column with porous monolithic packing for online solid-phase extraction of multiple trace metals in environmental water samples, Anal. Chem., 92 (14), 9640–9648.
[27] Wu, D., Hu, L., Wang, Y., Wei, Q., Yan, L., Yan, T., Li, Y., and Du, B., 2018, EDTA modified β-cyclodextrin/chitosan for rapid removal of Pb(II) and acid red from aqueous solution, J. Colloid Interface Sci., 523, 56–64.
[28] Uruş, S., Purtaş, S., Ceyhan, G., and Tümer, F., 2013, Solid phase extraction of Pb(II), Cu(II), Cd(II) and Cr(III) with syringe technique using novel silica-supported bis(diazoimine) ligands, Chem. Eng. J., 220, 420–430.
[29] Zhang, J., 2013, Preparation, characterization and application of thiosemicarbazide grafted multiwalled carbon nanotubes for solid-phase extraction of Cd(II), Cu(II) and Pb(II) in environmental samples, J. Environ. Sci., 25 (11), 2331–2337.
[30] Chen, S., Yan, J., Liu, Y., Wang, C., and Lu, D., 2021, Determination of Mn(II) and Mn(VII) in beverage samples using magnetic dispersive micro-solid phase extraction coupled with solidified floating organic drop microextraction followed by graphite furnace atomic absorption spectrometry, Food Chem., 359, 129958.
[31] Jiang, X., An, Q.D., Xiao, Z.Y., Zhai, S.R., and Shi, Z., 2019, Versatile core/shell-like alginate@polyethylenimine composites for efficient removal of multiple heavy metal ions (Pb2+, Cu2+, CrO42−): Batch and fixed-bed studies, Mater. Res. Bull., 118, 110526.
[32] Riyanto, P.D., 2014, Validasi & Verifikasi Metode Uji Sesuai dengan ISO/IEC 17025 Laboratorium Pengujian dan Kalibrasi, Deepublish, Daerah Istimewa Yogyakarta, Indonesia.
[33] Harmita, H., 2004, Petunjuk pelaksanaan validasi metode dan cara perhitungannya, Majalah Ilmu Kefarmasian, 1 (3), 117–135.
[34] Biaduń, E., Sadowska, M., Ospina-Alvarez, N., and Krasnodębska-Ostręga, B., 2016, Direct speciation analysis of thallium based on solid phase extraction and specific retention of a Tl(III) complex on alumina coated with sodium dodecyl sulfate, Microchim. Acta, 183 (1), 177–183.
[35] Volynkin, S.S., Demakov, P.A., Shuvaeva, O.V., and Kovalenko, K.A., 2021, Metal-organic framework application for mercury speciation using solid phase extraction followed by direct thermal release-electrothermal atomization atomic absorption spectrophotometric detection (ETA AAS), Anal. Chim. Acta, 1177, 338795.
[36] Fei, J., Wu, X., Sun, Y., Zhao, L., Min, H., Cui, X., Chen, Y., Liu, S., Lian, H., and Li, C., 2021, Preparation of a novel amino functionalized ion-imprinted hybrid monolithic column for the selective extraction of trace copper followed by ICP-MS detection, Anal. Chim. Acta, 1162, 338477.
DOI: https://doi.org/10.22146/ijc.70587
Article Metrics
Abstract views : 2875 | views : 1907Copyright (c) 2022 Indonesian Journal of Chemistry
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.
View The Statistics of Indones. J. Chem.