The Modification of PVDF Membrane via Crosslinking with Chitosan and Glutaraldehyde as the Crosslinking Agent

https://doi.org/10.22146/ijc.25127

Romaya Sitha Silitonga(1), Nurul Widiastuti(2*), Juhana Jaafar(3), Ahmad Fauzi Ismail(4), Muhammad Nidzhom Zainol Abidin(5), Ihsan Wan Azelee(6), Mahesan Naidu(7)

(1) Department of Chemistry, Faculty of Science, Institut Teknologi Sepuluh Nopember (ITS), Jl. Arief Rahman Hakim, Sukolilo, Surabaya 60111, Indonesia
(2) Department of Chemistry, Faculty of Science, Institut Teknologi Sepuluh Nopember (ITS), Jl. Arief Rahman Hakim, Sukolilo, Surabaya 60111, Indonesia
(3) Faculty of Petroleum and Renewable Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor Bahru, Johor, Malaysia
(4) Faculty of Petroleum and Renewable Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor Bahru, Johor, Malaysia
(5) Faculty of Petroleum and Renewable Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor Bahru, Johor, Malaysia
(6) Faculty of Petroleum and Renewable Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor Bahru, Johor, Malaysia
(7) Faculty of Petroleum and Renewable Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor Bahru, Johor, Malaysia
(*) Corresponding Author

Abstract


Poly(vinylidene fluoride) (PVDF) has outstanding properties such as high thermal stability, resistance to acid solvents and good mechanical strength. Due to its properties, PVDF is widely used as a membrane matrix. However, PVDF membrane is hydrophobic properties, so as for specific applications, the surface of membrane needs to be modified to become hydrophilic. This research aims to modify PVDF membrane surface with chitosan and glutaraldehyde as a crosslinker agent. The FTIR spectra showed that the modified membrane has a peak at 1655 cm-1, indicating the imine group (–N=C)- that was formed due to the crosslink between amine group from chitosan and aldehyde group from glutaraldehyde. Results showed that the contact angle of the modified membrane decreases to 77.22° indicated that the membrane hydrophilic properties (< 90°) were enhanced. Prior to the modification, the contact angle of the PVDF membrane was 90.24°, which shows hydrophobic properties (> 90°). The results of porosity, Ɛ (%) for unmodified PVDF membrane was 55.39%, while the modified PVDF membrane has a porosity of 81.99%. Similarly, by modifying the PVDF membrane, pure water flux increased from 0.9867 L/m2h to 1.1253 L/m2h. The enhancement of porosity and pure water flux for the modified PVDF membrane was due to the improved surface hydrophilicity of PVDF membrane.

Keywords


polyvinylidene fluoride membrane; chitosan; glutaraldehyde

Full Text:

Full Text PDF


References

[1] Liu, F., Hasyim, N.A., Liu, Y., Abed, M.R.M., and Li, K., 2011, Progress in the production and modification of PVDF membranes, J. Membr. Sci., 375 (1-2), 1–27.

[2] Aravind, U.K., Mathew, J., and Aravindakumar, C.T., 2007, Transport studies of BSA, lysozyme and ovalbumin through chitosan/polystyrene sulfonate multilayer membrane, J. Membr. Sci., 299 (1-2), 146–155.

[3] Yoon, K., Kim, K., Wang, X., Fang, D., Hsiao, B.S., and Chu, B., 2006, High flux ultrafiltration membranes based on electrospun nanofibrous PAN scaffolds and chitosan coating, Polymer, 47 (7), 2434–2441.

[4] Xi, Z.Y., Xu, Y.Y., Zhu, L.P., Wang, Y., and Zhu, B.K., 2009, A facile method of surface modification for hydrophobic polymer membranes based on the adhesive behavior of poly(DOPA) and poly(dopamine), J. Membr. Sci., 327 (1-2), 244–253.

[5] Huan, S., Liu, G., Han, G., Cheng, W., Fu, Z., Wu, Q., and Wang, Q., 2015, Effect of experimental parameters on morphological, mechanical and hydrophobic properties of electrospun polystyrene fibers, Materials, 8 (5), 2718–2734.

[6] Beppu, M.M., Vieira, R.S., Aimoli, C.G., and Santana, C.C., 2007, Crosslinking of chitosan membranes using glutaraldehyde: Effect on ion permeability and water absorption, J. Membr. Sci., 301 (1-2), 126–130.

[7] Rinaudo, M., 2006, Chitin and chitosan: Properties and applications, Prog. Polym. Sci., 31 (7), 603–632.

[8] Chanachai, A., Meksup, K., and Jiraratananon, R., 2010, Coating of hydrophobic hollow fiber PVDF membrane with chitosan for protection against wetting and flavor loss in osmotic distillation process, Sep. Purif. Technol., 72 (2), 217–224.

[9] Chen, A.H., and Chen, S.M., 2009, Biosorption of azo dyes from aqueous solution by glutaraldehyde-crosslinked chitosans, J. Hazard. Mater., 172 (2-3), 1111–1121.

[10] Bottino, A., Capannelli, G., and Munari, S., 1985, Effect of coagulation medium on properties of sulfonated polyvinylidene fluoride membranes, J. Appl. Polym. Sci., 30 (7), 3009–3022.

[11] Azmi, R.A., Goh, P.S., Ismail, A.F., Lau, W.J., Ng, B.C., Othman, N.H., Noor., A.M., Yusoff, M.S.A., 2015, Deacidification of crude palm oil using PVA-crosslinked PVDF membrane, J. Food Eng., 166, 165–173.

[12] Boributh, S., Chanachai, A., and Jiraratananon, R., 2009, Modification of PVDF membrane by chitosan solution for reducing protein fouling, J. Membr. Sci., 342 (1-2), 97–104.

[13] Basuki, B.R., and Sanjaya, I.G.M., 2009, Sintesis ikat silang kitosan dengan glutaraldehid serta identifikasi gugus fungsi dan derajat deasetilasinya, Jurnal Ilmu Dasar, 10 (1), 93–101.

[14] Fang, Y., Xu, Z.K., and Wu, J., 2013, "Surface Modification of Membranes" in Encyclopedia of Membrane Science and Technology, John Wiley & Sons, Inc., New York, 1–15.

[15] Kesting, R.E., 1991, Synthetic Polymeric Membranes, McGraw Hill, New York.



DOI: https://doi.org/10.22146/ijc.25127

Article Metrics

Abstract views : 5503 | views : 5213


Copyright (c) 2017 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.