RELATION BETWEEN PORE MODEL AND CENTER-LINE TEMPERATURE IN HIGH BURN-UP UO2 PELLET

https://doi.org/10.22146/ijc.21690

Suwardi Suwardi(1*)

(1) Center for Nuclear Technology – National Nuclear Energy Agency BATAN PUSPIPTEK, Serpong, Banten-15310 Indonesia
(*) Corresponding Author

Abstract


Relation between pore model and center-line temperature of high burn up UO2 Pellet. Temperature distribution has been evaluated by using different model of pore distribution. Typical data of power distribution and coolant data have been chosen in this study. Different core model and core distribution model have been studied for related temperature, in correlation with high burn up thermal properties. Finite element combined finite different adapted from Saturn-1 has been used for calculating the temperature distribution. The center-line temperature for different pore model and related discussion is presented.


Keywords


pore model; high burn up; UO2 pellet; centerline temperature

Full Text:

Full Text PDF


References

[1] Ritzhaupt, H.J., 1993, Saturn=FS 1 A computer code for Thermo-mechanical Fuel Rod Analysis, Kernforschungszentrum Karlsruhe

[2] INSC-ANL, UO2 properties, http: // www.insc.anl.gov /matprop/uo2, July 1998

[3] Olander, D.R., 1976, Fundamental aspects of Nuclear Reactor Fuel Elements, En.R&D Admin.

[4] El-Wakil, W.W., 1985, Nuclear Heat Transport, International Textbooks Co.,

[5] Watteau, M., 1998, Framatome ANP Extended Burn-up Experience and Views on LWR Fuels. Proc. Conf. LWR Fuel Perfor-mance & Modeling, IWG



DOI: https://doi.org/10.22146/ijc.21690

Article Metrics

Abstract views : 1085 | views : 1013


Copyright (c) 2010 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.