Sergio Leon De Rooy(1*), Endang Tri Wahyuni(2), Wiratni Wiratni(3), Siti Syamsiah(4), Jamil Ismail(5)

(1) Chemistry Department, Advanced Teacher Training Institute, Anton de Kom University, Paramaribo, Suriname
(2) Chemistry Department, Faculty of Mathematic and Natural Sciences, Gadjah Mada University, Yogyakarta, Indonesia 55281
(3) Department of Chemical Engineering, Faculty of Engineering, Gadjah Mada University, Yogyakarta, Indonesia 55281
(4) Department of Chemical Engineering, Faculty of Engineering, Gadjah Mada University, Yogyakarta, Indonesia 55281
(5) School of Chemical Sciences, University of Science Malaysia Penang Malaysia
(*) Corresponding Author


Purification and characterization of biodegradable plastic namely Polyhydroxybutyrate (PHB) in Cupriavidus necator have been carried out. C. necator was grown on a Ramsay medium with fixed substrate conditions and optimized for time. Stepwise purification of PHB was carried out, by using hydrogen peroxide and chloroform. The effect of temperature, time, and hydrogen peroxide concentration on the purification were also evaluated. The extracted PHB was studied with XRD, FTIR and 1H-NMR and 13C-NMR to determine its structure and purity. Yield and crystallinity were also studied with HPLC and XRD, respectively. The results of the research showed that higher concentrations of hydrogen peroxide gave better yields, whereas higher temperatures and longer lysis times led to different results. Higher crystallinity was observed when purification temperatures were elevated, but higher hydrogen peroxide concentration and longer extraction time gave varying crystallinity. The highest yield ca 66.10 % DCW was reached by purification using H2O2 20 %, at 100 oC for 2 h. The results of   TGA analysis indicated that the purity of the PHB obtained was about 75 % and by using DSC, it was found that the PHB showed good thermal properties.


PHB; recovery; hydrogen peroxide; characterization

Full Text:

Full Text PDF


[1] Scott, G., 2000, Polymer Degradation and Stability, VCH Publishers Inc., New York.

[2] Lee, S.Y., 1996, TIBTECH 14, 431 – 438.

[3] Page, W.J., and Cornish, A., 1993, Environ. Microbiol. 55, 1334 – 1339.

[4] Doi, Y., 1990, Microbial Polyesters, VCH Publishers Inc., New York.

[5] Nelson, N., 1944, J. Biol. Chem. 153, 375 – 380.

[6] O’Dell, J.W., 1993, Environmental Monitoring Systems Laboratory Office of Research Development, Method 350.1. U.S. EPA. Cincinnati, Ohio

[7] Karr, D. B., Waters, J. K. and Emerich, D.W., 1983, Appl. Environ. Microbiol. 46, 1339-1344.

[8] Bluhm, T. L., Hamer, G. K., Marchessault, R.H., Fyfe, C.A., and Veregin, R.P., 1986, Macromolecules, 19, 2871 – 2876.

[9] Stohs, S.J., 1995, J Basic Clin Physiol Pharmacol, 6 (3 – 4), 205 – 228.

[10] Janigova, I., Lacik, I., and Chodak, I. 2002, Polymer Degradation and Stability, 77, 35 – 41.

DOI: https://doi.org/10.22146/ijc.21664

Article Metrics

Abstract views : 1646 | views : 1844

Copyright (c) 2010 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Analytics View The Statistics of Indones. J. Chem.