Home-Made Micro Valve for Determining Malachite Green Dye by Flow Injection Analysis

https://doi.org/10.22146/ijc.24707

Amal Saadoon Majeed(1*), Ahmed Saleh Farhood(2), Luma Ahmed Mohammed Ali(3), Dakhil Nassir Taha(4),

(1) Sub-Department of Basic Science , College of Nursing, University of Kufa, Kufa, Iraq
(2) Department of Chemistry, College of Science, University of Babylon, Babylon, Iraq
(3) Department of Chemistry, College of Science, University of Babylon, Babylon, Iraq
(4) Department of Chemistry, College of Science, University of Babylon, Babylon, Iraq
(*) Corresponding Author

Abstract


The research is included studying and designing micro flow injection system which is characterized with rapidity, simplicity, and low cost for the determination of green malachite dye. The study of flow rate of carrier stream, repeatability, dispersion coefficient, and calibration graph are conducted. It is found that the optimum conditions for the determination of mentioned dye are flow rate 4.200 mL/min, sampling rate 102 sample/h, limit of detection 0.05 ppm, linear range (0.05-18.00) ppm with linearity (R2=0.9700), RSD is 0.355, the repeatability for seven successive injections is studied for the two concentrations 5 ppm and 12 ppm, and the dispersion coefficient values are 1.73 and 1.28 at the two concentrations 2 ppm and 9 ppm respectively.

Keywords


μFlow injection; green malachite dye; home-made micro valve

Full Text:

Full Text PDF


References

[1] Van der Linden, W.E., 1994, Classification and definition of analytical methods based on flowing media (IUPAC Recommendations 1994), Pure Appl. Chem., 66 (12), 2493–2500.

[2] Ṙuz̆ic̆ka, J., and Hansen, E.H., 1975, Flow injection analyses: Part I. A new concept of fast continuous flow analysis, Anal. Chim. Acta, 78 (1), 145–157.

[3] Ṙuz̆ic̆ka, J., and Stewart, J.W.B., 1975, Flow injection analysis: Part II. Ultrafast determination of phosphorus in plant material by continuous flow spectrophotometry, Anal. Chim. Acta, 79, 79–91.

[4] Stewart, J.W.B., Ṙuz̆ic̆ka, J., Bergamin, H., and Zagatto, E. A., 1976, Flow injection analysis: Part III. Comparison of continuous flow spectrophotometry and potentiometry for rapid determination of the total nitrogen content in plant digests, Anal. Chim. Acta, 81 (2), 371–386.

[5] Ṙuz̆ic̆ka, J., Stewart, J.W.B., and Zagatto, E.A., 1976, Flow injection analysis: Part IV. Stream sample splitting and its application to the continuous spectrophotometric determination of chloride in brackish waters, Anal. Chim. Acta, 81 (2), 387–396.

[6] Stewart, J.W.B., and Ṙuz̆ic̆ka, J., 1976, Flow injection analysis: Part V. Simultaneous determination of nitrogen and phosphorus in acid digests of plant material with a single spectrophotometer, Anal. Chim. Acta, 82 (1), 137–144.

[7] Hansen, E.H., and Ṙuz̆ic̆ka, J., 1976, Flow injection analysis: Part VI. The determination of phosphate and chloride in blood serum by dialysis and sample dilution, Anal. Chim. Acta, 87 (2), 353–363.

[8] Betteridge, D., and Ṙuz̆ic̆ka, J., 1976, The determination of glyosbol in water by flow-injection analysis - a novel way of measuring viscosity, Talanta, 23 (5), 409–410.

[9] Trojanowicz, M., 2010, Advances in Flow Analysis, 2nd Ed., Willey-VCH verlag GmbH and Co. KGaA, 22–25.

[10] Kolev, S.D., McKelvie, I.D., and BarcelÓ, D., 2008, Comprehensive Analytical Chemistry: Advances in Flow Injection Analysis and Related Techniques, 1st Ed., Elsevier, Australia, 25, 83, 96.

[11] Taha, D.N., and Obaid, Z.S., 2016, Designing flow injection unit for chromates determining, Res. J. Pharm. Biol. Chem. Sci., 7 (6), 2241–2250.

[12] Naser, N.A., Kadim, K.H., and Taha, D.N., 2012, Synthesis and characterization of an organic reagent 4-(6-bromo-2-benzothiazolylazo) pyrogallol and its analytical application, J. Oleo Sci., 61 (7), 387–392.

[13] Abbas, G.J., Mashkour, M.S., and Taha, D.N., 2016, Flow injection spectrophotometric determination of penicillamine in pharmaceutical fomulation using 1,2- naphthoquine-4-sulfonate, PURE, 5 (4), 92–105.

[14] Vurck, G., 1981, Anal. Chem. Acta, 14, 288.

[15] Ayala, A., Leal, L.O., Ferrer, L., and Cerdà, V., 2012, Multiparametric automated system for sulfate, nitrite and nitrate monitoring in drinking water and wastewater based on sequential injection analysis, Microchem. J., 100, 55–60.

[16] Ṙuz̆ic̆ka, J. and Hansen, E.H., 1984, Integrated microconduits for flow injection analysis, Anal. Chim. Acta, 161, 1–25.

[17] Skoog, D.A., West, D.M., Holler, F.J., and Crouch, S.R., 2014, Fundamentals of Analytical Chemistry, 9th Ed., Brooks/Cole, Cengage Learning, 168.

[18] Duffy, D.C., McDonald, J.C., Schueller, O.J.A., and Whitesides, G.M., 1998, Rapid prototyping of microfluidic systems in poly(dimethylsiloxane), Anal. Chem., 70 (23), 4974–4984.

[19] van den Berg, A., and Lammerink, T.S.J., 1998, Micro total analysis systems: microfluidic aspects, integration concept and applications, Top. Curr. Chem., 194, 21–49.

[20] Quintella, C.M., Watanabe, Y.N., Lima, A.M.V., Korn, M., Pepe, I., Embiruçu, M., and Musse, A.P.S., 2004, Evaluation of transversal and longitudinal dispersion in a flow injection system by exploiting laser induced fluorescence: influence of flow-cell positioning, Anal. Chim. Acta, 523, 293–300.

[21] Taha, D.N., and Majeed, A.S., 2015, Innovative design of microfluidic chip with two asymmetrical & interfered conduits and its applications for the determination of Bi(III) in some pharmaceutical formulations, Iraqi patent, 4392.

[22] Akyar, I. (Ed.), 2011, Wide Spectra of Quality Control, InTech.

[23] Watson, D.G., 1999, Pharmaceutical Analysis-A Textbook for Pharmacy Students and Pharmaceutical Chemists, Churchill Livingstone.

[24] Trojanowicz, M., 2008, Advances in Flow Analysis, WILEY-VCH, 16.

[25] Miller, J.N., and Miller, J.C., 2010, Statistics and Chemometrics for Analytical Chemistry, 6th Ed., Pearson Education Limited.

[26] Hibbert, D.B., and Gooding, J.J., 2006, Data Analysis for Chemistry: An Introductory Guide for Students and Laboratory Scientists, Oxford University Press, Inc.

[27] Taha, D.N., Samaka, I.S., and Mohammed, L.A., 2013, Adsorptive removal of dye from industrial effluents using natural Iraqi palygorskite clay as low-cost adsorption, J. Asian Sci. Res., 3 (9), 945–955.

[28] Taha, D.N., Samaka, I.S., Mohammed, L.A., and Naige, A.S., 2014, Adsorption studies of direct red 28 dye onto activated carbon prepared from low-cost material, Civ. Environ. Res., 6 (7), 149–159.

[29] Taha, D.N., and Samaka, I.S., 2012, Natural Iraqi palygorskite clay as low cost adsorbent for the treatment of dye containing industrial wastewater, J. Oleo Sci., 61 (12), 729–736.



DOI: https://doi.org/10.22146/ijc.24707

Article Metrics

Abstract views : 20 | views : 55

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Indexed by:


Creative Commons License
Indonesian Journal of Chemistry is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Statistics=

View The Statistics of Indones. J. Chem.