Planning Occupational Safety and Health Management System (OSHMS) Based on The Covid-19 Pandemic Guidance at So Good Food Dairy Company

Ali Al Farisi(1*), Mirwan Ushada(2), Moh. Wahyudin(3)

(1) Department of Agroindustrial Technology, Faculty of Agricultural Technology, Universitas Gadjah Mada, Indonesia
(2) Department of Agroindustrial Technology, Faculty of Agricultural Technology, Universitas Gadjah Mada, Indonesia
(3) Department of Agroindustrial Technology, Faculty of Agricultural Technology, Universitas Gadjah Mada, Indonesia
(*) Corresponding Author


Companies need an Occupational Safety and Health (OSH) culture based on a new life guidance during the Covid-19 pandemic. The application of OSH at So Good Food Dairy Company is moderate, though there are no control measures to minimize this risk. This study further aimed to analyze the application of OSH in the workplace and determine the implementation of the OSH Management System (OSHMS). Furthermore, it focused on identifying the probability of accidents at each workstation and proposed risk mitigation plans and anticipatory steps. Questionnaires were then administered to collect primary data from 62 respondents at the So Good Food Dairy Company’s processing, filling, packing, and storage workstations. Similarly, secondary data were obtained from documented information about the company’s OSH. All the respondents provided valid answers with a Cronbach alpha value of 0.9671, considered very reliable. Moreover, the questionnaire responses showed that So Good Food Dairy Company was rated highly by workers. Failure Mode and Effects Analysis (FMEA) was used to identify the factors causing work accidents and Risk Priority Number (RPN), while recommendations for improvement were made based on the Hazard Identification Risk Assessment & Risk Control (HIRARC) principles. A total of 12 probability accidents were observed in processing, four in filling and packing, and six in storage. Therefore, this study proposes an OSH design that includes an OSHMS planning based on clauses ISO 45001:2018 and ISO/PAS 45005:2020. Additionally, seven OSH programs and a risk mitigation road map using the Pareto Chart principle to set priorities were recommended.


ISO 45001:2018; ISO/PAS 45005:2020; OSH Management System

Full Text:



Cresswell, J. W. 2016. Research Design: Pendekatan Metode Kualitatif Kuantitatif dan Campuran (4th ed.). Yogyakarta: Pustaka Pelajar.

Decree of the Minister of Health of the Republic of Indonesia No. HK.01.07/MENKES/328/2020 on Guidelines for Prevention and Control of Corona Virus Disease 2019 (Covid-19) in Office and Industrial Workplaces in Supporting Business Continuity in Pandemic. 2020. Government Regulation No. 50 of 2012 on Implementation of Occupational Health and Safety Management System. 2012.

International Organization for Standardization. 2020. Occupational health and safety management - General guidelines for safe working during the COVID-19 pandemic (ISO/PAS Standard No. 45005). (

International Organization for Standardization. 2018. Occupational health and safety management systems—Requirements with guidance for use (ISO/DIS Standard No. 45001). ( _detail?csnumber=63787).

Nakat, Z., and Bou-Mitri, C. 2021. COVID-19 and the food industry: Readiness assessment. Food Control, Volume 121 (107661): 1-10.

Raharja, H. S. 2021. Uji Validitas dan Reliabilitas Untuk Penelitian. (

Nagamachi in Razza, B., and Paschoarelli, L. C. 2015. Affective Perception of Disposable Razors: A Kansei Engineering Approach. Procedia Manufacturing, Volume 3: 6228 – 6236.

Regulation of the Minister of Manpower of the Republic of Indonesia No. 12 of 2020 on the Strategic Plan of the Ministry of Manpower for the Year 2020-2024. 2020.

Santia, T. 2021. Jumlah Kecelakaan Kerja Meningkat di 2020, Capai 177.000 Kasus. (

Urrohmah, D. S. 2019. Identifikasi Bahaya Dengan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC) Dalam Upaya Memperkecil Risiko Kecelakaan Kerja di PT. PAL INDONESIA. JPTM, Volume 8 (1): 34–40.

Ushada, M., Suryandono, A., and Khuriyati, N. 2019. Kansei Engineering untuk Agroindustri. Yogyakarta: Gadjah Mada University Press.

Zabotto, C. N., Da, S. S. L., Amaral, D. C., Hornos, C. J. M., and Benze, B. G. 2019. Automatic Digital Mood Boards to Connect Users and Designers with Kansei Engineering. International Journal of Industrial Ergonomics, Volume 74(102829): 628—6236.


Article Metrics

Abstract views : 1208 | views : 1157


  • There are currently no refbacks.

Copyright (c) 2022 Ali Al Farisi, Mirwan Ushada, Moh. Wahyudin

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.