Lean Manufacturing Approach as A Means of Improving Callaway Diablo Golf Glove Production Systems

https://doi.org/10.22146/aij.v2i1.25000

Pujo Saroyo(1*), Kun Farihah(2), Mahmudun Ainuri(3)

(1) Department of Agroindustrial Technology, Faculty of Agricultural Technology, Universitas Gadjah Mada, Indonesia
(2) 
(3) Department of Agroindustrial Technology, Faculty of Agricultural Technology, Universitas Gadjah Mada, Indonesia
(*) Corresponding Author

Abstract


This study was aimed to provide suggestions for improvement of the value stream, which was illustrated using Value Stream Mapping through the reduction of wastes. The measure of improvement was focused on the process cycle efficiency (PCE) of the Callaway Diablo golf glove production systems at Adi Satria Abadi limited company. At the initial condition of Value Stream Mapping, the identified wastes were inventories, delays, transports, and defects. Those four wastes were then mapped using Value Stream Analysis Tool (VALSAT). The process cycle efficiency (PCE) value of the initial condition was equal to 5.06 %. The improvement formulations for the proposed Value Stream Mapping were made by determining optimal crew size, work-cell design, Kanban design, and idea of autonomation. The improvement formulations of the proposed Value Stream Mapping could reduce work in process (inventories) of 57.81 %, delays amounting to 55.52 %, and transportations between work stations at 52.54 %. The company’s PCE increased by 12.06 %.

Keywords


PCE; Value stream; VALSAT; Waste

Full Text:

PDF


References

Gaspersz, V. 2007. Lean Six Sigma For Manufacturing and Service Industries. Gramedia Pustaka Utama. Jakarta.

Hines, P. and Rich, N., 1997. The Seven Value Stream Mapping Tools. International Journal of Operations & Productions Management, Vol.17. No.1, 1997, pp.46-64.

Kumar, Phani and Muthu Kumar, 2003. Vendor Managed Inventory in Retail Industry. White paper . Tata Consultant Services.

Republika.,2009. Global Crisis, Export Sleman Down 1 Million Dollars.http://koran.republika.co.id. Accessed on October 12, 2010.

Ridwan , A., and R. Ekawati. The design of the Production System Using Value Stream Analysis Tools (VALSAT). Department of Industrial Engineering . University SultanAgeng Tirtayasa . Banten

Shingo, S., 1989. A Study of the Toyota Production System from an Industrial Engineering. Viewpoint, Productivity Press, Cambridge, MA.

Triratnafuri, E., 2009. Thesis. Implementation of Lean Manufacturing Using Value Stream Mapping Tool with Process Cycle Efficiency Indicators at Adi Satria Abadi Limited Company. Department of Agroindustrial Technology. Gadjah Mada University, Yogyakarta.

Womack, J.P., and D.T.Jones, 1994. From Lean Production to the Lean Enterprise. Harvard Business Review. March - April 1994. PP.93-130.



DOI: https://doi.org/10.22146/aij.v2i1.25000

Article Metrics

Abstract views : 1394 | views : 978

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Pujo Saroyo, Kun Farihah, Mahmudun Ainuri

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.