The Integration of Bridge Health Monitoring System with Traffic Monitoring System
Abstract
Bridge health monitoring system is a real-time data collection system that consists of components, responses, changes, and the construction process of bridge structures. This system aims to help assessing the structural security risks that could damage to the bridge structure by utilizing Wireless Sensor Network (WSN) as data retrieval. This system has a focus on the structure parameters of the bridge,but does not pay attention to vehicle factors,such as vehicle weight, vehicle patterns,and types of vehicles that pass on the bridge,whichcan also be factors of the bridge's health assessment. Anothersystem,namelya traffic control system,measuresvehicle weight using Weight in Motion (WIM).It can be used to obtainvehicle factors,especially vehicle weight,that also helps in assessing bridge health. This paper proposes the integrationof these two systems in order to create a system that can measure health of bridge structures,as well asmonitor the weight of the vehicle.Through this integration, it is possible to manage WSN sleep and wake time which helps saving energy.Experimental result shows that the system can measure natural frequencies close to the value of Finite Element Analysis (FEA),showing the validity of the developed system.
References
J.A.C. Tokognon, B. Gao, G.Y. Tian, dan Y. Yan, “Structural Health Monitoring Framework Based on Internet of Things: A Survey,” IEEE Internet of Things Journal, Vol. 7, No. 4, hal. 4-7, 2017.
T. Böhm, C. Lackhove, dan M. Meyer zu Hörste, “Integrated Traffic Management using Data from Traffic, Asset Conditions, Energy and Emissions,” dalam Handbook of Research on Emerging Innovations in Rail Transportation Engineering, B.U. Rai, Ed. Hershey, USA: IGI Global, 2016, hal. 405-419.
Z. Alam, G. Wang, J. Cao, dan J. Wu, "Deploying Wireless Sensor Network with Fault-Tolerance for Structural Health Monitoring," IEEE Transaction on Computer, Vol. 64, No. 2, hal. 382-395, 2015.
E. Sazonov, H. Li, D. Curry, dan P. Pillay, "Self-Powered Sensor for Monitoring of Highway Bridges," IEEE Sensor Journal, Vol. 9, No. 11, hal. 1422-1429, 2009.
Z. Zou, Y. Bao, F. Deng, dan H. Li, "An Approach of Reliable Data Transmission with Random Redundancy for Wireless Sensors in Structural Health Monitoring," IEEE Sensors Journal, Vol. 15, No. 2, hal. 809-818, 2015.
S. Kim, J. Lee, M.S. Park, dan B.W. Jo, "Vehicle Signal Analysis Using Artificial Neural Networks for a Bridge Weigh-in-Motion System," IEEE Sensors Journal, Vol. 9, No. 10, hal. 7943-7956, 2009.
A. Araujo, J. García-Palacios, J. Blesta, F. Tirado, dan E. Romero, "Wireless Measurement System for Structural Health Monitoring With High Time-Synchronization Accuracy," IEEE Transactions on Instrumentation and Measurement, Vol. 61, hal. 801-810, 2012.
D. Mascareñas, E. Flynn, C. Farrar, G. Park, dan M. Todd, "A Mobile Host Approach for Wireless Powering and Interrogation of Structural Health Monitoring Sensor Networks," IEEE Sensors Journal, Vol. 9, No. 12, hal. 1719-1726, 2009.
R. Bajwa, "Wireless Weigh-In_Motion: Using Road Vibratiob to Estimate Truck Weights," Ph.D. Thesis, Electrical Engineering and Computer Sciences University of California, Berkeley, USA, 2013.
S.M. Khan, S. Atamturktur, M. Chowdhury, dan M. Rahman, "Integration of Structural Health Monitoring and Intelligent Transportation Systems for Bridge Condition Assessment: Current Status and Future Direction," IEEE Transactions on Intelligent Transportation Systems, Vol. 17, No. 8, hal. 2107–2122, 2016.
J. Gajda, R. Sroka, M. Stencel, T. Zeglen, P. Piwowar, P. Burnos, dan Z. Marszalek, "Design and Accuracy Assessment of the Multi-sensor Weigh-in-Motion System," IEEE Instrumentation and Measurement Technology Conference (I2MTC), 2015, hal. 1036–1041.
K. Kondratjevs, N. Kunicina, A. Patlins, A. Zabasta, dan A. Galkina, "Vehicle Weight Detection Sensor Development for Data Collecting in Sustainable City Transport System," 57th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON), 2016, hal. 1-5.
Z. Zhang, Y. Huang, R. Bridgelall, M. Al-Tarawneh, dan P. Lu, "Optimal System Design for Weigh-In-Motion Measurements Using In-Pavement Strain Sensors," IEEE Sensors Journal, Vol. 17, No. 23, hal. 7677-7684, 2017.
M.J. Chae, H.S. Yoo, J.Y. Kim, dan M.Y. Cho, "Development of a Wireless Sensor Network System for Suspension Bridge Health Monitoring," Automation in Construction, Vol. 21, No. 1, hal. 237-252, 2012.
X. Hu, B. Wang, dan H. Ji, "A Wireless Sensor Network-Based Structural Health Monitoring System for Highway Bridges," Computer-Aided Civil and Infrastructure Engineering, Vol. 28, No. 3, hal. 193-209, 2013.
A.B. Noel, A. Abdaoui, T. Elfouly, M.H. Ahmed, A. Badawy, dan M.S. Shehata, "Structural Health Monitoring Using Wireless Sensor Networks: A Comprehensive Survey," IEEE Communications Surveys and Tutorials, Vol. 19, No. 3, hal. 1403-1423, 2017.
A.A. Islam, F. Li, H. Hamid, dan A. Jaroo, "Bridge Condition Assessment and Load Rating Using Dynamic Response," YoungsTown State University, Ohio, USA, Final Report 134695, 2014.
S.A. Putra, G.A.A. Sani, A.T. Nurwijaya, A. Anandadiga, P.B. Wijayanto, B.R. Trilaksono, dan M. Riyansyah, "Sistem Penilaian Kondisi Jembatan Menggunakan Respons Dinamik dengan Wireless Sensor Network," Jurnal Nasional Teknik Elektro dan Teknologi Informasi (JNTETI), Vol. 7, No. 3, hal. 338-343, 2018.
A.M. de Souza, C.A.R.L. Brennand, R.S. Yokoyama, E.A. Donato, E.R.M. Madeira, dan L.A. Villas, "Traffic Management Systems: A Classification, Review, Challenges, and Future Perspectives," International Journal of Distributed Sensor Networks, Vol. 13, No. 4, hal. 1-14, 2017.
© Jurnal Nasional Teknik Elektro dan Teknologi Informasi, under the terms of the Creative Commons Attribution-ShareAlike 4.0 International License.
1.png)
