A Comparative Study on the Confinement Models of High-Strength Steel Fiber Concrete
Abstract
Since the last four decades, the behavior of concrete contains of steel fiber, or often called steel fiber concrete, with a wide range of compressive strength has been carried out. Generally, the results of the experimental program produced a material which has a more ductile compared with normal concrete or concrete without fiber. Due to the ductility properties of the material, it is very suitable for use as an earthquake-resistant structural material. At the same time, the behavior of high-strength steel-fiber concrete has also investigated, one of which is about confined high-strength steel-fiber concrete. Analytical models of confined high-strength steel fiber concrete have been developed in various preliminary studies, with their characteristics derived based on the experimental results. Therefore, this research evaluated the models of confined high-strength steel-fiber concrete proposed by Mansur et al., Hsu and Hsu, and Paultre et al. The evaluation includes stress-strain behavior, strength enhancement of confined concrete (f'cc/f'co) or K value, the increase in confined concrete strain (ε'cc/ε'co), and strain of confined concrete when the stress has dropped by 50 percent against its unconfined strain (εcc50/εc50). The comparison method was carried out using a statistical approach and stress-strain simulation. Evaluation results showed significant predictive differences in confinement models in terms of post-peak behavior and parameters ε'cc/ε’co and εcc50/εc50. Prediction of confinement models on the value of f'cc/f’co to the experimental results has a coefficient of variation above 10%. The result further showed that a modified model of confined high-strength steel-fiber concrete was proposed and able to simulate the stress-strain behavior.
References
Amariansah, W. and Karlinasari, R. (2019). The Influence of Steel Fiber on the Stress-Strain Behavior of Confined Concrete. Journal of Advanced Civil and Environmental Engineering, 2, pp. 46-52.
Antonius, Widhianto, A., Darmayadi, D. and Asfari, G.D. (2014). Fire Resistance of Normal and High-Strength Concrete with Contains of Steel Fibre. Asian Journal of Civil Engineering, 15, pp. 655-669.
Antonius, and Imran, I. (2012). Experimental Study of Confined Low-, Medium- and High-Strength Concrete Subjected to Concentric Compression. ITB Journal of Engineering Science, 44, pp. 252-269.
Antonius, Purwanto and Harprastanti, P. (2019). Experimental Study of the Flexural Strength and Ductility of Post Burned Steel Fiber RC Beams. International Journal of Technology, 10, pp. 428-437.
Antonius (2015). Strength and Energy Absorption of High-Strength Steel Fiber Concrete Confined by Circular Hoops. International Journal of Technology, 6, pp. 217-226.
Antonius (2014a). Performance of High-Strength Concrete Columns Confined by Medium Strength of Spirals and Hoops. Asian Journal of Civil Engineering, 15, pp. 245-258.
Antonius (2014b). Studies on the Provisions of Confining Reinforcement for High-Strength Concrete Column. Procedia Engineering, 95, pp. 100-111.
Antonius, Imran, I. and Setiyawan, P. (2017). On the Confined High-Strength Concrete and Need of Future Research. Procedia Engineering, 171, pp. 121–130.
Aoude, H., Hosinieh, M.M., Cook, W.D. and Mitchell, D. (2014). Behaviour of Rectangular Columns Constructed with SCC and Steel Fibers. Journal of Structural Eng., September.
Antonius, Karlinasari, R. and Darmayadi, D. (2014). Confinement Model for Steel Fiber Concrete. Report of Competitive Research, Directorate General of Higher Education (in Indonesian).
Carreira, D. J., and Chu, K.-H. (1985). Stress-Strain Relationship for Plain Concrete in Compression. ACI Journal, 82, pp. 797-804.
Cholida, N.F.F., Antonius and Ni’am, F. (2018). A Parametric Study of Confinement Effects to the Interaction Diagram of P-M for High-Strength Concrete Columns. Journal of Advanced Civil and Environmental Engineering, 1, pp. 30-37.
Ezeldin, A. S., and Balaguru, P. N. (1992). Normal and High-Strength FiberReinforced Concrete under Compression, Journal of Materials in Civil Engineering, 4, pp. 415-429.
Han, A.L, Antonius and Okiyarta, A.W. (2015). Experimental Study of Steel Fiber Reinforced Concrete Beams with Confinement. Procedia Engineering, 125, pp. 1030–1035.
Hanif, F., and Kanakubo, T. (2017). Shear Performance of Fiber-Reinforced Cementitious Composites Beam-Column Joint Using Various Fibers. Journal of The Civil Engineering Forum, 3, pp. 113-124.
Hsu, L.S. and Hsu, C.T. (1994). Stress-Strain Behavior of Steel-Fiber High-Strength Concrete under Compression. ACI Structural Journal, 91, pp. 448-457.
Indonesian National Standard, SNI-2847-2019. Requirements of Structural Concrete for Building and Commentary [in Indonesian].
Janani, S. and Santhi, A.S. (2018). Multiple Linear Regression Model for Mechanical Properties and Impact Resistance of Concrete with Fly Ash and Hooked-End Steel Fibers. International Journal of Technology, 9, pp. 526-536.
Korsun, V., Vatin, N., Franchi, A., Korsun, A., Crespi, P. and Mashtaler, S. (2015). The Strength and Strain of High-Strength Concrete Elements with Confinement and Steel Fiber Reinforcement Including the Conditions of the Effect of Elevated Temperatures. Procedia Engineering, 117, pp. 970–979.
Liu, Y., Zhu, P. and Wang, W. (2018). Study on Axial Compression Test of Fiber Reinforced High Strength Concrete Column. AIP Conference Proceedings, 2036, 030007.
Lee, S.C., Oh, Joung-Hwan and Cho, Jae-Yeol. (2015). Compressive Behavior of Fiber-Reinforced Concrete with End-Hooked Steel Fibers. Materials, 8 pp. 1442–1458.
Mansur, M.A., Chin, M.S. and Wee, T.H. (1997). Stress-Strain Relationship of Confined High-Strength Plain and Fiber Concrete. Journal of Materials in Civil Engineering, 9, pp. 171-179.
Mander, J.B., Priestley, M.J.N. and Park, R. (1988). Theoretical Stress-Strain Model for Confined Concrete. Journal of Structural Engineering, 114, pp. 1804-1824.
Nishiyama, M. (2009). Mechanical Properties of Concrete and Reinforcement–State-of-the-Art Report on HSC and HSS in Japan. Journal of Advanced Concrete Technology, 7, pp. 157-182.
Pantazopoulou, S.J. and Zanganeh, M. (2001). Triaxial Tests of Fiber-Reinforced Concrete. Journal of Materials in Civil Engineering, 13, pp. 340-348.
Paultre, P. and Legeron, F. (2008). Confinement Reinforcement Design for Reinforced Concrete Columns. Journal of Structural Eng. ASCE, 134, pp.738-749.
Paultre, P., Eid, R., Langlois, Y. and Lévesque, Y. (2010). Behavior of Steel Fiber-Reinforced High-Strength Concrete Columns under Uniaxial Compression. Journal of Structural Engineering, 136, pp. 1225–1235.
Rosidawani, Imran, I., Pane, I. and Sugiri, S. (2017). Stress-Strain Relationship of Synthetic Fiber Reinforced Concrete Columns. MATEC Web of Conferences, 103(02004).
Copyright (c) 2022 The Author(s)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Copyright is granted to authors for the purpose of providing protection for articles written to describe experiments and their results. JCEF will protect and defend the work and reputation of the author and are also willing to address any allegations of violation, plagiarism, fraud, etc. against articles written and published by JCEF. JCEF is published under the terms of the Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0). The author holds the copyright and assigns the journal rights to the first publication (online and print) of the work simultaneously.
