Correlation of P-wave Velocity with Rock Quality Designation (RQD) in Volcanic Rocks

https://doi.org/10.22146/jag.48594

Teuku Faisal Fathani(1*), Ainul Fatayaatis Salaamah(2), Wahyu Wilopo(3)

(1) Department of Civil and Environmental Engineering, Universitas Gadjah Mada
(2) Department of Civil and Environmental Engineering, Universitas Gadjah Mada
(3) Department of Geological Engineering, Universitas Gadjah Mada
(*) Corresponding Author

Abstract


One important part of rock mass investigation is the geomechanical assessment in terms of rock mass classification systems. Rock mass classification is one of the most efficient methods in rock mechanics to provide a basic understanding of rock mass characterization. Rock mass properties can be determined by a seismic refraction survey as an indirect geophysical assessment. In this study, the P-wave velocity from seismic refraction was compared with the Rock Quality Designation (RQD) from the boreholes. The empirical correlation between the RQD and the P-wave velocity was found by using the linear regression analysis. The RQD value estimated from the P-wave velocity can beapplied for tropical environment study with geological conditions of volcanic rocks. This study helps to estimate and predict the subsurface rock quality, to reduce investigation costs, and to improve understanding of subsurface rock quality.


Keywords


Seismic refraction , Rockfill dam , Rock mechanic , Lithology , Geological mapping

Full Text:

PDF


References

Barton, N. (2007) Rock Quality, Seismic Velocity, Attenuation and Anisotropy. Netherlands: Taylor & Francis.

Barton, N., Lien, R. and Lunde, J. (1974) Engineering Classification of Rock Masses for the Design of Tunnel Support. Rock Mechanics, 6, pp.189–236.

Bery, A.A. and Saad, R. (2012) Correlation of Seismic P-Wave Velocities with Engineering Parameters (N Value and Rock Quality) for Tropical Environmental Study. International Journal of Geoscience, 3, pp.749–757.

Bieniawski, Z.T. (1989) Engineering Rock Mass Classifications: A Complete Manual for Engineers and Geologists in Mining, Civil and PetroleumEngineering. Canada: Wiley.

Budetta, P., De Riso, R. and De Luca, C. (2001) Correlations Between Jointing and Seismic Velocities in Highly Fractured Rock Masses. Bulletin of Engineering Geology and the Environment, 60(3),pp.185–192.

Deere, D.U., Hendron, A.J., Patton, F.D. and Cording, E.J. (1967) Design of Surface and Near Surface Construction in Rock. In Failure and Breakage of Rock. Proceedings of 8th US Symposium Rock Mechanics, Society of Mining Engineers, American Institute of Mining, Metallurgical and Petroleum Engineers (SAUS), 1(1), pp. 237–302.

El-Naqa, A. (1996) Assessment of Geomechanical Characterization of A Rock Mass Using a Seismic Geophysical Technique. Geotechnical and Geological Engineering, pp. 291–305.

Fathollahy, M., Uromeiehy, A. and Riahi, M.A. (2017) Evaluation of P- wave velocity in Different Joint Spacing. 58, pp. 157–168.

Ghanbari, Y., Ramazi, H., Pazand, K. and Madani, N. (2013) Investigation of Rock Quality of Shirinrud Dam Site by Engineering Seismology. Arabian Journal of Geosciences, 6, pp.177–185.

Hoek, E. and Brown, E.T. (1997) Practical Estimates of Rock Mass Strength. International Journal of Rock Mechanics and Mining Sciences, 34(8), pp. 1165–1186.

Kahraman, S. (2001) A Correlation Between P-wave Velocity, Number of Joints and Schmidt Hammer Rebound Number. International Journal of Rock Mechanics and Mining Sciences, 38(5), pp.729–733.

Khandelwal, M. (2013) Correlating P-wave Velocity with the Physico-Mechanical Properties of Different Rocks. Pure and Applied Geophysics, 170(4), pp. 507–514.

Lin, D., Lou, F., Yuan, R., Shang, Y., Zhao, Y., Ma, J. and Zhang, L. (2017) Rock Mass Characterization for Shallow Granite by Integrating Rock Core Indices and Seismic Velocity. International Journal of Rock Mechanics and Mining Sciences, 93, pp. 130–137.

Lind, D.A., Marchal, W.G. and Wathen, S.A. (2006) Basic Stastistic for Bussiness and Economics. Singapore.

McCann, D.M., Culshaw, M.G. and Northmore, K.J. (1990) Rock Mass Assessment from Seismic Measurements. Geological Society Engineering Geology Special Publication, pp. 257–266.

McDowell, P.W. (1993) Seismic Investigation for Rock Engineering. Rock Testing and Site Characterization, pp. 619–634.

Nourani, M.H., Moghadder, M.T. and Safari, M. (2017) Classification and Assessment of Rock Mass Parameters in Choghart Iron Mine UsingP-wave Velocity. Journal of Rock Mechanics and Geotechnical Engineering, 9, pp. 318–328.

PT. Virama Karya, PT. Yodya Karya and PT. Wahana Krida Konsulindo, 2015. Pemantapan Geologi Bendungan Bener. Yogyakarta. Rahardjo, W., Sukandarrumidi and Rosidi, H.M.D.(1995) Peta Geologi Regional Lembar Yogyakarta Skala 1:100.000. Bandung: Geology Research and Development Center.

Sharma, P.K. and Singh, T.N. (2008) A correlationbetween P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength. Bulletin of Engineering Geology and the Environment, 67(1), pp. 17–22.

Sjøgren, B., Øfthus, A. and Sandberg, J. (1979) Seismic Classification of Rock Mass Qualities. Geophysical Prospecting, 27, pp. 409–442.

Yagiz, S. (2011) P-wave Velocity Test for Assessment of Geotechnical Properties of Some Rock Materials. Bull. Mater. Sci., 34(4), pp. 947–953.

Zhang, L. (2005) Engineering Properties of Rock. USA: Elsevier. Zhang, L. (2016) Determination and Applications of Rock Quality Designation (RQD). Journal of Rock Mechanics and Geotechnical Engineering, 8, pp. 389–397.



DOI: https://doi.org/10.22146/jag.48594

Article Metrics

Abstract views : 5329 | views : 3654

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Teuku Faisal Fathani, Ainul Fatayaatis Salaamah, Wahyu Wilopo

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal of Applied Geology Indexed by:

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.