Effect of immersion time in mouthwash on the flexural strength of polyethylene fiber-reinforced composite

https://doi.org/10.22146/majkedgiind.40194

Syazwani Akmal(1), Widowati Siswomihardjo(2), Siti Sunarintyas(3*)

(1) Klinik Pergigian Kempas, Government Clinic, Persiaran Tanjung, Tampoi, 81200 Johor Bharu, Johor
(2) Department of Biomaterials, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta
(3) Department of Biomaterials, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta
(*) Corresponding Author

Abstract


Fiber-reinforced composite (FRC) fixed dentures are exposed to various oral environments. One of the ways in maintaining good oral condition is by using mouthwash. Questions have been araised about the safety of prolonged
use of mouthwash towards FRC. The aim of this study was to evaluate the effect of immersion time in mouthwash on the flexural strength of polyethylene FRC. The specimens used were polyethylene FRC (Construct, KerrLab, USA) and flowable composite resin (Master Flow Biodinamica, Brazil). Block shaped specimens (2x2x25 mm) was light cured (n=12). Specimens were divided into threek groups of immersion: Group 1 (without immersion); Group 2 (24 hour immersion); Group 3 (48 hour immersion). The mouthwash used was Listerine Multi-Protect (Johnson & Johnson, Indonesia) (21.6% alcohol content). Flexure strength was measured by Universal Testing Machine. The results showed the average strength value (MPa) for Group 1 was 91.318 ± 12.466, Group 2 was 62.253 ± 8.027, and Group 3 was
55.033 ± 3.373. Statistical analysis (ANOVA) showed that immersion time in mouthwash influenced the flexural strength of polyethylene FRC (p<0.05). LSD0.05 showed there were significant differences of flexural strength between Group
1-Group 2, Group 1-Group 3 but not for Group 2-Group 3. In conclusion, the flexural strength of polyethylene FRC were decreased by the immersion time in mouthwash.

Keywords


flexural strength; immersion time; mouthwash; polyethylene fiber-reinforced composite

Full Text:

PDF


References

1. Park R, Jang J: Performance improvement of carbon fiber/polyethylene fiber hybrid composites. Journal of Materials Science.1999; 34(12): 2903–2910.


2. de Moraed Porto IC, das Neves LE, de Souza CK, Parolia A, Barbosa dos Santos
N. A Comparative Effect of Mouthwashes with Different Alcohol Concentrations on
Surface Hardness, Sorption and Solubility of Composite Resins. Journal of Oral Health and Dental Management. 2014; 13(2): 502-506.


3. Craig RG, Powers JM. Restorative dental materials. 11th ed. St. Louis, United State of America: Mosby; 2002. 203-205.


4. Gagari E, Kabani S. Adverse effects of mouthwash use. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology. 1995; 80(4): 432–439. doi: 10.1016/S1079-2104(05)80337-3


5. Soderholm KM, Roberts MJ. Influence of water exposure on the tensile strength of composites. J Dent Res.1990; 69(12): 1812–1816. doi: 10.1177/00220345900690120501

6. Sarrett DC, Coletti DP, Peluso AR. The effects of alcoholic beverages on composite wear. Dental Materials. 2000; 16(1): 62–67. doi: 10.1016/S0109-5641(99)00088-3


7. Sideridou ID, Karabela MM, Vouvoudi EC, Papanastasiou GE. Sorption and desorption parameters of water or ethanol in lightcured dental dimethacrylate resins. Journal of Applied Polymer Science. 2007; 107(1): 463–475. doi: 10.1002/app.27094


8. Jafari K, Hekmatfar S and Badakhsh S. The effect of mouthwashes on surface hardness of dental ceramics. J. Dent. Biomater. 2014; 1(1): 23-26.


9. Mallick PKK. Fiber-reinforced composites: Materials, manufacturing, and design.
United States: Boca Raton, Florida, U.S.A. 2007; 2.


10. Sakaguchi RL, Powers JM. Craig’s restorative dental materials, 13th ed. Philadelphia: Elsevier/Mosby. 2012; 85. 164.

11. Asmussen E. Softening of BISGMAbased polymers by ethanol and by organic
acids of plaque. European Journal of Oral Sciences.1984; 92(3): 257–261.
doi: 10.1111/j.1600-0722.1984.tb00889.x


12. Kao EC. Influence of food-simulating solvents on resin composites and glass-ionomer restorative cement. Dent Mater.1989; 5(3): 201–208.
doi: 10.1016/0109-5641(89)90014-6


13. Penugonda B, Settembrini L, Scherer W, Hittleman E, Strassler H. Alcohol-containing mouthwashes: effect on composite hardness. J Clin Dent. 1994; 5(2): 60-62.

14. Asmussen E, Peutzfeldt A. Influence of pulse-delay curing on softening of polymer structures. Journal of Dental Research. 2001; 80(6): 1570–1573.
doi: 10.1177/00220345010800061801


15. McKinney JE, Wu W. Chemical softening and wear of dental composites. Journal of Dental Research.1985; 64(11): 1326–1331. doi: 10.1177/00220345850640111601


16. Weiner R, Millstein P, Hoang E, Marshall D. The effect of alcoholic and non-alcoholic mouthwashes on heat-treated composite resin. Operative Dentistry. 1997; 22(6): 249-253.


17. Ferracane JL, Berge HX. Fracture toughness of experimental dental composites aged in ethanol. J Dent Res. 1995; 74(7): 1418–1423.
doi: 10.1177/00220345950740071501


18. Goldberg M. In vitro and in vivo studies on the toxicity of dental resin components: a review. Clin Oral Investig. 2008; 12(1): 1–8.
doi: 10.1007/s00784-007-0162-8


19. Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater. 2006; 22(3): 211–222. doi: 10.1016/j.dental.2005.05.005.


20. Ferracane JL, Condon JR. Rate of elution of leachable components from composite. Dental Materials. 1990; 6(4): 282–287. doi: 10.1016/S0109-5641(05)80012-0


21. Chow TW, Cheng YY, Ladizesky NH. Polyethylene fiber reinforced poly (methyl
methacrylate) - water sorption and dimensional changes during immersion.
Journal of Dentistry. 1993; 21(6): 367–372. doi: 10.1016/0300-5712(93)90014-H


22. Curtis AR, Shortall AC, Marquis PM, Palin WM. Water uptake and strength characteristics of a nanofilled resin-based composite. J Dent. 2008; 36(3): 186–193. doi: 10.1016/j.jdent.2007.11.015


23. Kamble VD, Parkhedkar RD, Mowade TK. The effect of different fiber reinforcements on flexural strength of provisional restorative resins: an in-vitro study. J Adv Prosthodont. 2012; 4(1): 1-6. doi: 10.4047/jap.2012.4.1.1


24. Munoz E, Garcia-Manrique JA. Water absorption behavior and its effect on the
mechanical properties of flax Fiber-reinforced Bioepoxy composites. International Journal of Polymer Science. 2015(6); 1–10. doi: 10.1155/2015/390275


25. Gurgan S, Onen A, Koprulu H. In vitro effects of alcohol-containing and alcoholfree mouthrinses on microhardness of some restorative materials. J Oral Rehabil. 1997; 24(3): 244–246.


26. Valittu PK, Könönen M. Biomechanical aspects and material properties. In: Karlsson S, Nilner K and Dahl B (eds). A textbook of Fixed Prosthodontics. The Scandinavian Approach. Stockholm: Föorlagshuset Gothia AB; 2000. 116-130.



DOI: https://doi.org/10.22146/majkedgiind.40194

Article Metrics

Abstract views : 2054 | views : 1761

Refbacks

  • There are currently no refbacks.




Copyright (c) 2020 Majalah Kedokteran Gigi Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.


 

 View My Stats


real
time web analytics