* Corresponding Author
Pengaruh Reagen Pelindian pada Sintesis ZnO dari Debu Tungku Busur Listrik
https://doi.org/10.22146/jrekpros.50739 Widi Astuti(1*), Agus Haerudin(2), Istihanah Nurul Eskani(3), Aulia Pertiwi Tri Yuda(4), Fajar Nurjaman(5), Joni Setiawan(6), Dwi Wiji Lestari(7), Himawan Tri Bayu Murti Petrus(8)
(1) Balai Penelitian Teknologi Mineral, LIPI, Jl. Ir. Sutami Km. 15 Tanjung Bintang, Lampung Selatan, Lampung 35361
(2) Balai Besar Kerajinan dan Batik, Kementerian Perindustrian, Jl Kusumanegara, Yogyakarta
(3) Balai Besar Kerajinan dan Batik, Kementerian Perindustrian, Jl Kusumanegara, Yogyakarta
(4) Balai Penelitian Teknologi Mineral, LIPI, Jl. Ir. Sutami Km. 15 Tanjung Bintang, Lampung Selatan, Lampung 35361
(5) Balai Penelitian Teknologi Mineral, LIPI, Jl. Ir. Sutami Km. 15 Tanjung Bintang, Lampung Selatan, Lampung 35361
(6) Balai Besar Kerajinan dan Batik, Kementerian Perindustrian, Jl Kusumanegara, Yogyakarta
(7) Balai Besar Kerajinan dan Batik, Kementerian Perindustrian, Jl Kusumanegara, Yogyakarta
(8) Departemen Teknik Kimia, Fakultas Teknik, Universitas Gadjah Mada, Jl Grafika No. 2 Kampus UGM, Yogyakarta, 55283
(*) Corresponding Author
Abstract
ZnO nanoparticle was synthesized by a simple hydrometallurgical method using raw material of electric arc furnace dust (EAFD),which is a solid waste in the stainless steel industry. Electric arc furnace dust contains 68.81% Zn in the form of zincite (ZnO) and simonkolleite (H10Cl2O9Zn5). The synthesis was carried out in two main steps, i.e., leaching and alkaline precipitation. In this study, the effect of leaching reagent, leaching temperature, and leaching reagent concentration on the percent extraction of Zn in the leaching process from electric arc furnace dust and the characteristics of the resulting ZnO product were studied. The experimental results showed that leaching reagent of acetic acid gives the highest percent extraction of Zn. The results also showed that the increase of temperature and acid concentration could improve the Zn extraction percentage. At 2M acid concentration, Zn extraction percentage already achieved 100%; hence the process is independent of temperature. The ZnO product has a purity of 96%. The XRD data confirmed the nano sizes of the ZnO product.
A B S T R A K
ZnO nanopartikel disintesis dengan metode hidrometalurgi sederhana menggunakan bahan baku berupa debu tungku busur listrik yang merupakan limbah padat industri baja tahan karat. Debu busur listrik mengandung 68,81% Zn dalam bentuk zincite (ZnO) dan simonkolleite (H10Cl2O9Zn5). Proses sintesis dilakukan dalam dua tahap utama yaitu pelindian dan pengendapan alkali. Pada penelitian ini dipelajari pengaruh reagen pelindian, suhu pelindian, dan konsentrasi reagen pelindian pada proses pelindian terhadap persen ekstraksi Zn dari debu tungku busur listrik dan karakteristik produk ZnO yang dihasilkan. Hasil percobaan menunjukkan bahwa asam asetat adalah reagen pelindian yang memberikan persen ekstraksi Zn tertinggi. Hasil percobaan juga menunjukkan bahwa semakin tinggi suhu dan konsentrasi asam yang digunakan, maka semakin meningkat persen ekstraksi Zn yang diperoleh. Tetapi pada konsentrasi asam 2M, suhu pelindian tidak terlalu berpengaruh karena dengan konsentrasi asam asetat 2M pada semua kondisi suhu pelindian, persen ekstraksi Zn yang diperoleh adalah 100%. Hasil pelindian menggunakan asam asetat pada kondisi optimum menghasilkan produk ZnO dengan kemurnian sekitar 96%. Data XRD juga menunjukkan bahwa ZnO yang terbentuk memiliki ukuran nano.
Keywords
Full Text:
PDFReferences
Alfarisa, Suhufa, Rifai, D.A., dan Toruan, P.L., 2018, Studi difraksi sinar-X struktur nano seng oksida (ZnO) [X-ray diffraction study on ZnO nanostructures], Risalah Fisika, 2 (2), 53-57
Astuti,W., Hirajima,T., Sasaki,K., and Okibe, N., 2016, Comparison of effectiveness of citric acid and other acids in leaching of low-grade Indonesian saprolitic ores, Minerals Engineering, 85, 1–16.
Bindu, P., and Thomas, S., 2014, Estimation of lattice strain in ZnO nanoparticles: X-ray peak profile analysis, J. Theor. Appl. Phys., 8, 123–34.
de Buzina, PJWK, Heckb, N.C., and Vilela, A.C.F, 2017, EAF dust: An overview on the influences of physical, chemical and mineral features in its recycling and waste incorporation routes, J. Mater. Res. Technol, 6(2), 194–202.
Dutrizac, J.E. and Chen, T.T., 1998, The role of hydrometallurgy in the recycling of zinc, copper and lead, Acta Metall Slovaca, 1, 5–28.
Darvishi, E., Kahrizi, D., Arkan, E., 2019, Comparison of different properties of zinc oxide nanoparticles synthesized by the green (using Juglans regia L. leaf extract) and chemical methods, J. Mol. Liq., 286, 110831.
Geetha, M.S., Nagabhushana, H., and Shivananjaiah, H.N., 2016, Green mediated synthesis and characterization of ZnO nanoparticles using Euphorbia Jatropa latex as reducing agent, Journal of Science: Advanced Materials and Devices, 1, 301-310.
Havlik, T., Souza, B.V., Bernardes, A.M., Schneider, I.A.H., and Miskufova A., 2006, Hydrometallurgical processing of carbon steel EAF dust., J. Hazard Mater. B, 135, 311–8.
Jha, M.K., Kumar, V., and Singh, R.J.,2001, Review of hydrometallurgical recovery of zinc from industrial wastes, Resour. Conserv. Recycl., 33, 1–22.
Kołodziejczak-Radzimska, A. and Jesionowski, T., 2014, Zinc oxide—from synthesis to application: A review, Materials, 7, 2833-2881
Król, A., Pomastowski, P., Rafińska, K., Railean-Plugaru, V., Buszewski, B., 2017, Zinc oxide nanoparticles: Synthesis, antiseptic activity and toxicity mechanism, Advances in Colloid and Interface Science, 249, 37–52
Mager, K., Meurer, U., and Wirling, J.,2003, Minimizing dioxin and furan emissions during zinc dust recycle by the Waelz process, JOM, 55(8), 21–5.
Matinisea, N., Fukua, X.G., Kaviyarasua, K., Mayedwa, N., and Maazaa, M., 2016, ZnO nanoparticles via Moringa oleifera green synthesis: Physical properties & mechanism of formation, Applied Surface Science, 406, 339–347.
Nakamura, T., Shibata, E., Takasu, T., and Itou, H.,2008, Basic considerationon EAF dust treatment using hydrometallurgical processes, Resour. Process, 55(3), 144–8.
Quijorna, N., de Pedro, M., Romero, M., and Andrès, A., 2014, Characterisation of the sintering behaviour of Waelz slagfrom electric arc furnace (EAF) dust recycling for use in theclay ceramics industry, J. Environ. Manag., 132, 278–86.
Sinclair, R.J.,2005, The Extractive Metallurgy of Zinc. Spectrum Series, Vol. 13, 1st ed., The Australasian Institute of Mining and Metallurgy, Victoria
Tsakiridis, P.E., Oustadakis, P., Katsiapi, A., and Agatzini-Leonardous, S., 2010, Hydrometallurgical process for zinc recovery from electricarc furnace dust (EAFD). Part II: Downstream processing andzinc recovery by electrowinning, J. Hazard. Mater., 179, 8–14.
Xia, D.K. and Pickles, C.A., 1999, Caustic roasting and leaching of electricarc furnace dust, Can. Metall. Q., 38 (3), 175–86.
DOI: https://doi.org/10.22146/jrekpros.50739
Article Metrics
Abstract views : 3190
| 
views : 4003
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 The authors
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.