Piezoelectric Energy Harvester for IoT Sensor Devices


Noor Pratama Apriyanto(1*), Eka Firmansyah(2), Lesnanto Multa Putranto(3)

(1) Universitas Gadjah Mada
(2) Universitas Gadjah Mada
(3) Universitas Gadjah Mada
(*) Corresponding Author


Limited battery power is a major challenge for wireless sensor network (WSN) in internet of things (IoT) applications, especially in hard-to-reach places that require periodic battery replacement. The energy harvesting application is intended as an alternative to maintain network lifetime by utilizing environmental energy. The proposed method utilized piezoelectricity to convert vibration or pressure energy into electrical energy through a modular piezoelectric energy harvesting design used to supply energy to sensor nodes in WSN. The module design consisted of several piezoelectric elements, of which each had a different character in generating energy. A bridge diode was connected to each element to reduce the feedback effect of other elements when pressure was exerted. The energy produced by the piezoelectric is an impulse so that the capacitor was used to quickly store the energy. The proposed module produced 7.436 μJ for each step and 297.4 μJ of total energy with pressure of a 45 kg load 40 times with specific experiments installed under each step. The energy could supply WSN nodes in IoT application with a simple energy harvesting system. This paper presents a procedure for measuring the energy harvested from a commonly available piezoelectric buzzer. The specific configurations of the piezoelectric and the experiment setups will be explained. Therefore, the output energy characteristics will be understood. In the end, the potentially harvested energy can be estimated. Therefore, the configuration of IoT WSN could be planned.


Wireless Sensor Network;Internet of Things;Energy Harvesting;Piezoelectric

Full Text:



F. Mazunga and A. Nechibvute, “Ultra-Low Power Techniques in Energy Harvesting Wireless Sensor Networks: Recent Advances and Issues,” Scientific African, Vol. 11, pp. 1-14, Mar. 2021.

A. Chowdhury and D. De, “Energy-Efficient Coverage Optimization in Wireless Sensor Networks Based on Voronoi-Glowworm Swarm Optimization-K-Means Algorithm,” Ad Hoc Networks, Vol. 122, pp. 1-16, Nov. 2021.

A.A. Babayo, M.H. Anisi, and I. Ali, “A Review on Energy Management Schemes in Energy Harvesting Wireless Sensor Networks,” Renewable and Sustainable Energy Reviews, Vol. 76, pp. 1176-1184, Sep. 2017.

C. Prommak and S. Modhirun, “Optimal Wireless Sensor Network Design for Efficient Energy Utilization,” Journal of Computer Science, Vol. 8, No. 1, pp. 149-158, Nov. 2011.

S. Balaji, M. Anitha, D. Rekha, and D. Arivudainambi, “Energy Efficient Target Coverage for a Wireless Sensor Network,” Measurement, Vol. 165, Dec. 2020.

S. Saravanan and M. Madheswaran, “Design of Low Power Multiplier with Reduced Spurious Transition Activity Technique for Wireless Sensor Network,” 2008 Fourth International Conference on Wireless Communication and Sensor Networks, 2008, pp. 36-39.

Q. Tan, Y. Liu, Y. Han, W. An, S. Ci, and H. Tang, “Energy Harvesting Aware Topology Control with Power Adaptation in Wireless Sensor Networks,” Ad Hoc Networks, Vol. 27, pp. 44-56, Apr. 2015.

S. Sachan, R. Sharma, and A. Sehgal, “Energy Efficient Scheme for Better Connectivity in Sustainable Mobile Wireless Sensor Networks,” Sustainable Computing: Informatics and Systems, Vol. 30, Jun. 2021.

Z. Huang, Q. Niu, S. Xiao, and T. Li, “Energy Harvesting Algorithm Considering Max Flow Problem in Wireless Sensor Networks,” Computer Communications, Vol. 150, pp. 626-633, Jan. 2020.

J. Ortiz, N. Zabala, P. Monje, V. Cokonaj, and G. Aranguren, “Energy Generation Based on Piezoelectric Transducers,” Renewable Energy and Power Quality Journal, Vol. 1, No. 11, pp. 245-250, Mar. 2013.

B. Khemmanee and D. Isarakorn, “Low-Cost Energy Management Circuit Base on Primary Feedback Self-Oscillating Flyback Converter for Piezoelectric Energy Harvesting,” 2015 18th International Conference on Electrical Machines and Systems (ICEMS), 2015, pp. 1035-1038.

L.B. Kong, T. Li, H.H. Hng, F. Boey, T. Zhang, and S. Li, Waste Energy Harvesting. Berlin, Germany: Springer Berlin Heidelberg, 2014.

I. Patel, “Ceramic Based Intelligent Piezoelectric Energy Harvesting Device,” in Advances in Ceramics - Electric and Magnetic Ceramics, Bioceramics, Ceramics and Environment, C. Sikalidis, Ed. Rijeka, Croatia: InTech, 2011, pp. 133-154.

A. Patil, M. Jadhav, S. Joshi, E. Britto, and A. Vasaikar, “Energy Harvesting Using Piezoelectricity,” 2015 International Conference on Energy Systems and Applications, 2015, pp. 517-521.

W.A. Ching, M.J. Geotina, N.S. Gora, R.J. Sucayre, R.V.M. Santiago, and J.M. Martinez, “Implementation of Piezoelectric Generator for Harvesting Energy for Different Types of Staircases with Automatic Switching Mechanism,” 2018 IEEE 10th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM), 2018, pp. 1-6.

G.J. Song, J.Y. Cho, K.-B. Kim, J.H. Ahn, Y. Song, W. Hwang, S.D. Hong, and T.H. Sung, “Development of a Pavement Block Piezoelectric Energy Harvester for Self-Powered Walkway Applications,” Applied Energy, Vol. 256, pp. 1-6, Dec. 2019.

G.J. Song, K.-B. Kim, J.Y. Cho, M.S. Woo, J.H. Ahn et al., “Performance of a Speed Bump Piezoelectric Energy Harvester for an Automatic Cellphone Charging System,” Applied Energy, Vol. 247, pp. 221-227, Aug. 2019.

J.Y. Cho, K.-B. Kim, W.S. Hwang, C.H. Yang, J.H. Ahn et al., “A Multifunctional Road-Compatible Piezoelectric Energy Harvester for Autonomous Driver-Assist LED Indicators with a Self-Monitoring System,” Applied Energy, Vol. 242, pp. 294-301, May 2019.

W. Hwang, K.-B. Kim, J.Y. Cho, C.H. Yang, J.H. Kim, G.J. Song et al., “Watts-Level Road-Compatible Piezoelectric Energy Harvester for a Self-Powered Temperature Monitoring System on an Actual Roadway,” Applied Energy, Vol. 243, pp. 313-320, Jun. 2019.

Piezoelectric Sound Components Application Manual, Murata Manufacturing Co., Ltd., Shibuya, Japan, 2012.

DOI: https://doi.org/10.22146/ijitee.67120

Article Metrics

Abstract views : 2594 | views : 1426


  • There are currently no refbacks.

Copyright (c) 2021 IJITEE (International Journal of Information Technology and Electrical Engineering)

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

ISSN  : 2550-0554 (online)

Contact :

Department of Electrical engineering and Information Technology, Faculty of Engineering
Universitas Gadjah Mada

Jl. Grafika No 2 Kampus UGM Yogyakarta

+62 (274) 552305

Email : ijitee.ft@ugm.ac.id