Utilization of Modified Indonesia Natural Bentonite for Dye Removal

  • Harish Reza Septiano Warsono Department of International Development Engineering, Tokyo Institute of Technology, 2-12-1, Ookayama, Meguro-ku, Tokyo 152-8550, Japan
  • Winarto Kurniawan Department of International Development Engineering, Tokyo Institute of Technology, 2-12-1, Ookayama, Meguro-ku, Tokyo 152-8550, Japan
  • Hirofumi Hinode Department of International Development Engineering, Tokyo Institute of Technology, 2-12-1, Ookayama, Meguro-ku, Tokyo 152-8550, Japan
Keywords: bentonite, Pillaring treatment, adsorbent, ion exchange, wastewater, dye removal

Abstract

Bentonite is clay mineral with many applications such as adsorbent, ion exchanger or catalyst support. Indonesia possesses high quantity of natural bentonite reserves, however, due to the limited knowledge about its properties and potential applications, the utilization is still not yet fully maximized. To address this problem, this research aimed to characterize the properties of Indonesian natural bentonite and study its capability in removing dye pollutants as an alternative application of Indonesian natural bentonite. Characterization of Indonesian natural bentonite was successfully conducted and the result showed that it had adequate properties to be utilized. Further modification with pillaring treatments using Al, Cu, Mn, and Ti were also successfully done to intercalate the metal pillaring agent into the bentonite bulk. Dye pollutants removal test showed that Indonesian natural bentonite and its modified forms were able to remove some dye pollutants from aqueous water system. The removal of the dyes was mainly influenced by the charge of the dyes as well as the pore size of the bentonites samples. Study on the influence of pH showed that cationic dye removal was promoted at high pH, while the removal of anionic dyes were promoted at low pH.

References

1. Al-Asheh, S., Banat, F., Abu-Aitah, L. (2003). Adsorption of phenol using different types of activated bentonites, Separation and Purification Technology, 33, 1.
2. Bertella, F., Pergher, S.B.C. (2015). Pillaring of bentonite clay with Al and Co, Microporous and Mesoporous Materials, 201, 116.
3. Cetco (2013). Sodium Bentonite: Its Structure and Properties. http://www.cetco.com/DesktopModules/Bring2mind/DMX/Download.aspx?Command= Core_Download&PortalId=0&EntryId=538. Retrieved: January 19, 2017.
4. Chapman, H.D. (1965). Cation-Exchange Capacity, Agonomy Monograph, Methods of Soil Analysis.
5. Drljaca, A., Anderson, J.R., Spiccia, L., Turney, T.W. (1997). A new method for generating chromium(III) intercalated clays, Inorganica Chimica Acta, 256, 151.
6. Indonesia Mine and Coal Research and Development Center (2017). Informasi Mineral & Batubara: Bentonit. http://www.tekmira.esdm.go.id/data/ Bentonit/ulasan.asp?xdir=Bentonit&commId=8&comm=Bentonit. Retrieved: January 15, 2017.
7. Inglethorpe, S. D. J., Morgan , D. J., Highley, D. E., Bloodworth, A. J. (1993). Industrial Minerals Laboratory Manual, British Geological Survey.
8. Jeenpadiphat, S., Tungasmita, D.N. (2013). Acid-activated pillar bentonite as a novel catalyst for the esterification of high FFA oil, Powder Technology, 237, 634.
9. Kunimine Industries Co. Ltd (2017). Bentonite. Kunimine Industries Co. Ltd. https://www.kunimine.co.jp/english/bent/bent_02.htm. Retrieved: January 19, 2017.
10. Panjaitan, R. R. (2010). The Usage of Bentonite in Industry, Surabaya, Surabaya Research and Standardization Center.
11. Shen, D., Fan, J., Zhou, W., Gao, B., Yue, Q., Kang, Q (2009). Adsorption kinetics and isotherm of anionic dyes onto organo-bentonite from single and multisolute systems, Journal of Hazardous Materials, 172, 99.
12. Steudel, A., Batenburg, L.F., Fischer, H.R., Weidler, P.G., Emmerich, K (2009). Alteration of swelling clay minerals by acid activation, Applied Clay Science, 44, 105.
Published
2018-12-31
How to Cite
Warsono, H. R. S., Kurniawan, W., & Hinode, H. (2018). Utilization of Modified Indonesia Natural Bentonite for Dye Removal. ASEAN Journal of Chemical Engineering, 18(2), 13-21. Retrieved from https://jurnal.ugm.ac.id/v3/AJChE/article/view/9020
Section
Articles