A Dynamic Model for Ultrasonic – assisted Extraction of Bio-active Compounds from Natural Products

  • Trung Kien Tran Department of Chemical Engineering, Hanoi University of Science and Technology (HUST), No. 1, Dai Co Viet Str., Hanoi, Vietnam.
  • Lan Huong Phung Department of Chemical Engineering, Hanoi University of Science and Technology (HUST), No. 1, Dai Co Viet Str., Hanoi, Vietnam
  • Hoai Nga le Department of Chemical Engineering, Hanoi University of Science and Technology (HUST), No. 1, Dai Co Viet Str., Hanoi, Vietnam
  • Thi Thu Huyen Nguyen Department of Chemical Engineering, Hanoi University of Science and Technology (HUST), No. 1, Dai Co Viet Str., Hanoi, Vietnam
  • Xuan Son Nghiem Department of dynamic and engineering equipment of plant, School of Process Sciences, Technische Universität Berlin, No. 135, 17. Juni Street, 10623 Berlin, Germany.
  • Van Thiem Pham Bachkhoa Consultancy and Technology Transfer One Member Co., Ltd. (BKContech Co.,Ltd.), HUST, No. 1 Dai Co Viet Str., Hanoi, Vietnam
Keywords: ultrasonic, extraction, curcumin, Epigallocatechin, rutin

Abstract

Ultrasonic technique has been applied for extraction processes, especially for separation of bio-active substances from natural organic products because of the short time requirement, energy saving and easy operating. The ultrasonic-assisted extraction (UE) therefore becomes a promising option. However, a major available obstacle was the lack of appropriate models for designing technological process. This paper presents a dynamic model for the UE process, application of separation of bio-active substances from natural products such as Curcumin from rhizome of Curcuma Longa L., Epigallocatechin from green tea leaf of Camellia Sinensis and Rutin from bud of Sophora Japonica. The agreement between data from experiment and calculated ones with the model indicates that, this dynamic model is suitable for prediction of the UE process and for serving as the base for further investigation into scale-up the extraction process.

References

1. Colegate S. M., Molyneux R. J., (2008). Bioactive Natural Products: Detection, Isolation, and Structural Determination, 2 nd ed., CRC Press, Raton.
2. Gu X., Cai J., Zhang Z., Su Q. (2007). Dynamic Ultrasound-Assisted Extraction of Catechin and Caffeine in Some Tea Samples. Annali di Chimic 97: 321 – 330.
3. Harker J. H., Richardson J. F., Backuhrst J. R. (2002). Chemical Engineering, Vol. 2, 5th ed., Butterworth-Heinemann.
4. Hitoshi K., Nobuyoshi M. (2007). Extraction of Catechins from Green Tea Using Ultrasound, Japanese Journal of Applied Physics 46 (7B): 4936 - 4938.
5. Nguyen Thi Thu Huyen, Tran Trung Kien, Phung Lan Huong, Pham Van Thiem (2010). Research on extraction process for Rutin assisted by ultrasonic, microwave and stir bar. Journal of science and technology, 48 (6A): 296- 304.
6. Nguyen Thi Thu Huyen, Tran Trung Kien, Pham Van Thiem (2010). Applying the dynamic model of Ultrasonic assisted extraction process for study of rutin separation from bud Sophora Japonica L. Journal of science and technology, 48, (6A): 305-312.
7. Sarker S. D., Latif Z., Gray A. I. ( 2006). Natural Products Isolation, 2nd ed., Humana Press Inc, New Jersey.
8. Sonawane S. S., Patil V. S. (2008). Effect of Ultrasound on Leaching of Tannic Acid from Tea and its Modelling. Chem. Eng. Technol. 31 (9): 1304 – 1309.
9. Tran T. K., Nghiem X. S., Phung L. H., Pham V. T. (2007). Study for isolation of Curcumin from Curcuma Longa L. using ultrasonic extraction, Vietnam Journal of Chemistry 45: 52 – 57.
10. Tran T. K., Nghiem X. S., Phung L. H. (2008). Dynamic model of Curcumin isolation process from yellow turmeric using ultrasonic extraction, Vietnam. Journal of Chemistry 46: 318-325
Published
2012-12-31
How to Cite
Tran, T. K., Phung, L. H., le, H. N., Nguyen, T. T. H., Nghiem, X. S., & Pham, V. T. (2012). A Dynamic Model for Ultrasonic – assisted Extraction of Bio-active Compounds from Natural Products. ASEAN Journal of Chemical Engineering, 12(2), 35-42. Retrieved from https://jurnal.ugm.ac.id/v3/AJChE/article/view/8130
Issue
Vol 12 No 2 (2012)
Section
Articles

Copyright holder for articles is ASEAN Journal of Chemical Engineering. Articles published in ASEAN J. Chem. Eng. are distributed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license. 

Authors agree to transfer all copyright rights in and to the above work to the ASEAN Journal of Chemical Engineering Editorial Board so that the Editorial Board shall have the right to publish the work for non-profit use in any media or form. In return, authors retain: (1) all proprietary rights other than copyright; (2) re-use of all or part of the above paper in their other work; (3) right to reproduce or authorize others to reproduce the above paper for authors’ personal use or for company use if the source and the journal copyright notice is indicated, and if the reproduction is not made for the purpose of sale.