Pulping Of Vetiver Grass With NH4OH-KOH-AQ Mixtures

  • Panitnad Chandranupap Department of Chemical Engineering, Faculty of Engineering, King Mongkut’s University of Technology North Bangkok, Bangkok, 10800, Thailand
  • Pravitra Chandranupap Department of Industrial Chemistry, Faculty of Applied Science, King Mongkut’s University of Technology North Bangkok, Bangkok, 10800, Thailand
Keywords: Spray Drying, Slurry, Drying Kinetics, Heat Transfer, Mass Transfer, Modeling

Abstract

The detail analysis of the heat and mass transfer between the droplet containing
suspended solids and the drying gas was carried out numerically. The temperature and
moisture distributions within the slurry droplet were calculated during the first and
second drying phases. The parametric study revealed that the droplet drying time
decreases with increasing the drying gas temperature and decreasing the droplet
diameter.

References

1) Chen, X.D., Peng, X.F. (2005). "Modified Biot number in the context of air drying of small moist porous objects," Drying Technology, 23, 83-103.
2) Crank, J. (1984). "Free and moving boundary problems," Oxford.
3) Elek, N., Hoffman, R., Raviv, U., Resh, R., Ishaaya, I., Magdassi, S. (2010). "Novaluron nanoparticles: Formation and potential use in controlling agricultural insect pests," Colloids Surf. A, 372, 66-72.
4) Dalmaz, N., Dzbelge H.O., Erasalan A.N., Uludag Y. (2007). “Heat and Mass Transfer mechanisms in drying of a suspension droplet: a new computational model,” Drying Technology, 25, 391 – 400.
5) Farid, M. (2003). "A new approach to modeling of single droplet drying," Chem. Eng. Sci., 58, 2985-2993.
6) Gharsallaoui, A., Roudauta, G., Chambina, O., Voilleya, A., Saurela, R. (2007). "Applications of spray-drying in microencapsulation of food ingredients: An overview," Food Research International, 40, 1107-1121.
7) Grigoriev, V.A., Zorin, V.M. (1988). "Thermal engineering handbook," Energoatomizdat, Moscow.
8) Kirillin, V.A., Sheindlin, A.E. (1956). "Thermodynamics of solutions," Energy, Moscow.
9) Masters, K. (1985). "Spray Drying Handbook," Longman Scientific and Technical.
10) Mezhericher, M., Levy, A., Borde, I. (2010). "Theoretical models of single droplet drying kinetics: a review," Drying Technology, 28, 278-293.
11) Nesic, S., Vodnik, J. (1991). "Kinetics of droplet evaporation," Chem. Eng. Sci., 46, 527-537.
12) Ochoa-Tapia, J.A., Stroeve, P., Whitaker, S. (1994). "Diffusive transport in two-phase media: spatially periodic models and Maxwell's theory for isotropic and anisotropic systems," Chem. Eng. Sci., 49, 709-726.
13) Okuyama, K., Abdullah, M., Lenggor, I.W., Iskandar, F. (2006). "Preparation of functional nanostructured particles by spray drying," Advanced Powder Technology, 17, 587-611.
14) Ranz, W.E., Marshall, W.R. (1952). "Evaporation from drops," Chem. Eng. Prog., 48, 141-146, 173-180.
15) Soottitantawat, A., Bigeard, F., Yoshii, H., Furuta, T., Ohgawara, M., Linko, P. (2005). "Influence of emulsion and powder size on the stability of encapsulated D-limonene by spray drying," Innovative Food Science and Emerging Technologies, 6, 107-114.
Published
2011-12-31
How to Cite
Chandranupap, P., & Chandranupap, P. (2011). Pulping Of Vetiver Grass With NH4OH-KOH-AQ Mixtures. ASEAN Journal of Chemical Engineering, 11(2), 37-44. Retrieved from https://jurnal.ugm.ac.id/v3/AJChE/article/view/8089
Section
Articles