Kinetics of Mass Transfer, Colour, Total Polyphenol and Texture Change of Manilkara Zapota During Convective Air Drying

  • Chien wha Chong Faculty of Chemical and Environmental Engineering, University of Nottingham, Malaysia Campus, MALAYSIA
  • Chung Lim Law Faculty of Chemical and Environmental Engineering, University of Nottingham, Malaysia Campus, MALAYSIA
  • Michael Wha Cloke Faculty of Chemical and Environmental Engineering, University of Nottingham, Malaysia Campus, MALAYSIA
  • Luqman Chuah Abdullah Faculty of Engineering, University Putra Malaysia, Selangor, MALAYSIA
  • Wan Ramli Wan Daud Faculty of Chemical Engineering, University Kebangsaan Malaysia, Selangor, MALAYSIA
Keywords: manilkara zapota, effective diffusivity, hardness, texture, colour, total polyphenol content

Abstract

The effects of air temperature and product size on drying kinetics, retained total polyphenol content (TPC), hardness kinetics and total colour change (.E) kinetics of ciku (Manilkara zapota) were investigated. In addition, five terms of the theoretical model were used to estimate the effective diffusivity values during drying at temperatures from40OC to 70OC. The drying rates of dried ciku were increased with increasing temperature and decreasing product size. It was found that hardness of ciku dried at temperature higher than 60OC increased significantly, when the moisture content was reduced toless than 0.5 g H2O/g DM (dry basis). In terms of nutritional value, the retained total polyphenol content (TPC) of dried ciku in hot air drying also increasing with temperature. The highest retained TPC was 141 mg GAE/ 100g of samples, which can be obtained from drying at 70OC.
Published
2009-12-31
How to Cite
Chong, C. wha, Law, C. L., Cloke, M. W., Abdullah, L. C., & Wan Daud, W. R. (2009). Kinetics of Mass Transfer, Colour, Total Polyphenol and Texture Change of Manilkara Zapota During Convective Air Drying. ASEAN Journal of Chemical Engineering, 9(1), 47-58. Retrieved from https://jurnal.ugm.ac.id/v3/AJChE/article/view/7710
Issue
Vol 9 No 1 (2009)
Section
Articles

Copyright holder for articles is ASEAN Journal of Chemical Engineering. Articles published in ASEAN J. Chem. Eng. are distributed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license. 

Authors agree to transfer all copyright rights in and to the above work to the ASEAN Journal of Chemical Engineering Editorial Board so that the Editorial Board shall have the right to publish the work for non-profit use in any media or form. In return, authors retain: (1) all proprietary rights other than copyright; (2) re-use of all or part of the above paper in their other work; (3) right to reproduce or authorize others to reproduce the above paper for authors’ personal use or for company use if the source and the journal copyright notice is indicated, and if the reproduction is not made for the purpose of sale.