Modelling as an Aid to Biomass Combustion in Plant Design

  • Michael R I Purvis Department of Mechanical and Design Engineering, University of Portsmouth
  • Gilbert Lim Department of Mechanical and Design Engineering, University of Portsmouth
  • Susan A Races Department of Chemical Engineering, De La Salle University
  • Carlita M Salazar Department of Chemical Engineering, De La Salle University
  • Raymond Girard R Tan Department of Chemical Engineering, De La Salle University
  • Stanley Santoso School of Chemical Engineering Campus, Universiti Sains Malaysia
Keywords: biomass, modelling, plant design, underfeed stoker

Abstract

Solid biomass materials are recognized as a sustainable energy source worldwide. In particular, lump biomass has considerable potential for exploitation as fuel in small- size underfeed stokers. The paper considers the design features of the underfeed stoker and its advantages in the burning of biomass. Some expe. i nental results are given to indicate the plant parameters to be modelled. An initial modelling approach is described for single-particle solid fuel combustion to predict flow patterns using the FLUENT Computational Fluid Dynamic (CFD) code. Predictions are compared against available experimental results showing reasonable qualitative and quantitative agreement. The paper concludes with information on the constraints on the modelling study and proposals for new work.

References

1. Abbas, T., Costen, P. G., and Lockwood, F. C. (1996). Solid fuel utilisation: From coal to biomass. The Combustion Institute, 26th Symposium (International) on Combustion, 3041-58.
2. Blackham, A. U., Smoot, L. D., and Yousefi, P. (1994). “Rates of oxidation of millimetre- size char particles: Simple experiments," Fuel, 73, 602–12.
3. Bruch, C., Peters, B., and Nussbaumer, T. (2003). "Modelling wood combustion under fixed-bed conditions," Fuel, 82, 729-38.
4. Eaton, A. M., Smoot, L. D., Hill, S. C., and Eatough, C. N. (1999). "Components, formulations, solutions, evaluation and application of comprehensive combustion models," Programme in Energy and Combustion Science, 25, 387-436.
5. FLUENT, Inc. (1998). FLUENT users guide. Sheffield, U.K. FLUENT, Inc. (1998). GAMBIT users guide.
6. Sheffield, U.K. Purvis, M. R. I., Tadulan, E. L., and Tariq, A. S. C. (2000). "NO emissions from the underfeed combustion of coal and biomass." J. Institute of Energy, 73, 495, 70–7.
7. Purvis, M. R.I., Tadulan, E. L., and Tariq, A. S. (2000). “NO, control by air staging in a small biomass-fuelled underfeed stoker," Int. J. Energy Research, 24, 917-33.
8. Santos, S. O. (2002). "The development of an underfeed stoker for biomass combustion," Ph.D. Dissertation, Department of Mechanical and Design Engineering, University of Portsmouth, U.K.
9. Solomon, P. R., Serio, M. A., and Suberg, E. M. (1992). "Coal pyrolysis: Experiments, kinetic rates, and mechanisms," Progress in Energy and Combustion, 18, 133-220.
10. Yang, Y. B., Yamauchi, H., Nasserzadeh, V., and Swithenbank, J. (2003). “Effects of fuel devolatilisation on the combustion of simulated solid wastes in a packed bed." Fuel. Online: Accessed: 30 May 2003.
Published
2004-12-31
How to Cite
Purvis, M. R. I., Lim, G., Races, S. A., Salazar, C. M., Tan, R. G. R., & Santoso, S. (2004). Modelling as an Aid to Biomass Combustion in Plant Design. ASEAN Journal of Chemical Engineering, 4(2), 75-83. Retrieved from https://jurnal.ugm.ac.id/v3/AJChE/article/view/7627
Section
Articles