Comparison of Furfural Production from Corn Waste and Empty Fruit Bunch (EFB): Effect of Time, Temperature, and Solvent
Abstract
Furfural is a compound derived from xylose, a building block material. Sources of furfural can come from various corn industry wastes such as corn cobs and corn husks, and palm oil industry wastes like Empty Fruit Bunch (EFB). This study aims to compare the potential of furfural production from corn industry waste and palm oil industry waste. The research method involves the hydrolysis and dehydration of hemicellulose using two types of solvents, sulfuric acid (SA) and Deep Eutectic Solvents (DES), at varying temperatures (160 °C, 170 °C, and 180 °C) and reaction times (60, 120, and 180 minutes). The highest furfural yield from corn cobs, 7.69 g/L, was obtained using 1 M sulfuric acid solvent at 160 °C for 60 minutes. The optimal condition for producing a high concentration of furfural from corn cobs was achieved using DES at 170°C for 60 minutes, yielding approximately 13.18 g/L. In contrast, furfural production from EFB resulted in a concentration of 4.70 g/L.
References
Abbott, A.P., 2022. “Deep eutectic solvents and their application in electrochemistry.” Curr. Opin. Green Sustain. Chem. 36, 100649. https://doi.org/10.1016/j.cogsc.2022.100649
Ai, B., Li, W., Woomer, J., Li, M., Pu, Y., Sheng, Z., Zheng, L., Adedeji, A., Ragauskas, A.J., and Shi, J., 2020. “Natural deep eutectic solvent mediated extrusion for continuous high-solid pretreatment of lignocellulosic biomass.” Green Chem. 22, 6372–6383. https://doi.org/10.1039/d0gc01560a
Amraini, S.Z., Irianty, R.S., Hamzah, N., Muria, S.R., Sari, N.L., Azhar, R.A., and Susanto, R., 2023. “The use of fractional factorial design to analyze the effect of sulfuric acid concentration and temperature on furfural yield.” Mater. Today Proc. 87, 240–245. https://doi.org/10.1016/j.clet.2023.100673
Awosusi, A.A., Ayeni, A.O., Adeleke, R., and Daramola, M.O., 2017. “Biocompositional and thermodecompositional analysis of South African agro‐waste corncob and husk towards production of biocommodities.” Asia‐Pacific J. Chem. Eng. 12, 960–968. https://doi.org/10.1002/apj.2138
Chen, Z., Bai, X., Lusi, A., Jacoby, W.A., and Wan, C., 2019. “One-pot selective conversion of lignocellulosic biomass into furfural and co-products using aqueous choline chloride/methyl isobutyl ketone biphasic solvent system.” Bioresour. Technol. 289, 121708. https://doi.org/10.1016/j.biortech.2019.121708
Cousin, E., Namhaed, K., Pérès, Y., Cognet, P., Delmas, M., Hermansyah, H., Gozan, M., Alaba, P.A., and Aroua, M.K., 2022. “Towards efficient and greener processes for furfural production from biomass: A review of the recent trends.” Sci. Total Environ. 847, 157599. http://doi.org/10.1016/j.scitotenv.2022.157599
Dashtban, M., Gilbert, A., and Fatehi, P., 2012. “Production of furfural: Overview and challenges.” Journal of Science & Technology for Forest Products and Processes, 2(4), 44–53.
Ditjetbun, 2019. Statistik Perkebunan Indonesia 2018-2020. Kementerian Pertanian.
Juwita, R., Syarif, L.R., and Tuhuloula, A., 2012. “The effect of the type and concentration of acid catalysts on the synthesis of furfural from rice husks.” Konversi 1, 34–38.
Lee, C.B.T.L., and Wu, T.Y., 2021. “A review on solvent systems for furfural production from lignocellulosic biomass.” Renew. Sustain. Energy Rev. 137, 110172. https://doi.org/10.1016/j.rser.2020.110172
Mittal, A., Black, S.K., Vinzant, T.B., O’Brien, M., Tucker, M.P., and Johnson, D.K., 2017. “Production of furfural from process-relevant biomass-derived pentoses in a biphasic reaction system.” ACS Sustain. Chem. Eng. 5, 5694–5701. https://doi.org/10.1021/acssuschemeng.7b00215
Muryanto, M, Amelia, F., Izzah, M.N., Maryana, R., Triwahyuni, E., Bardant, T.B., Filailla, E., Sudiyani, Y., and Gozan, M., 2022. “Delignification of empty fruit bunch using deep eutectic solvent for biobased-chemical production,” IOP Conf. Ser.: Earth Environ. Sci. 1108, 012013. https://doi.org/10.1088/1755-1315/1108/1/012013
Muryanto, Muryanto, Maryana, R., Triwahyuni, E., Sudiyani, Y., and Gozan, M., 2022. “Furfural production using aqueous deep eutectic solvent,” AIP Conf. Proc. 2708, 030003. https://doi.org/10.1063/5.0122673
Muryanto, M., Sudiyani, Y., Darmawan, M.A., Handayani, E.M., and Gozan, M., 2023. “Simultaneous delignification and furfural production of palm oil empty fruit bunch by novel ternary deep eutectic solvent.” Arab. J. Sci. Eng. 48, 16359–16371. https://doi.org/10.1007/s13369-023-08211-y
Panjaitan, J.R.H., Monica, S., and Gozan, M., 2017. “Production of furfural from palm oil empty fruit bunches: Kinetic model comparation.” IOP Conf. Ser. Earth Environ. Sci. 65, 012042. https://doi.org/10.1088/1755-1315/65/1/012042
Pointner, M., Kuttner, P., Obrlik, T., Jäger, A., and Kahr, H., 2016. “Composition of corncobs as a substrate for fermentation of biofuels.” Agron. Res., 12(2), 391-396
Ramadhan, R., Bahri, S., Muarif, A., Jalaluddin, J., and Nurlaila, R., 2022. “The Production of furfural from sugarcane bagasse using hydrolysis method with sulfuric acid catalyst.” Chem. Eng. J. Storage 2, 1–10.
Smith, E.L., Abbott, A.P., and Ryder, K.S., 2014. “Deep eutectic solvents (DESs) and their applications.” Chem. Rev. 114, 11060–11082. https://doi.org/10.1021/cr300162p
Sun, Y., Wang, Z., Liu, Y., Meng, X., Qu, J., Liu, C., and Qu, B., 2019. “A review on the transformation of furfural residue for value-added products.” Energies 13, 21. https://doi.org/10.3390/en13010021
Triwahyuni, E., Miftah, A.K., Muryanto;, Maryana, R., and Sudiyani, Y., 2021. “Effect of CO2-added steam explosion on oil palm empty fruit bunch for bioethanol production.” Cellul. Chem. Technol. 55, 839–847. https://doi.org/10.35812/CelluloseChemTechnol.2021.55.71
Tuas, M.A., and Lerrick, R.I., 2017. “Furfuric Acid synthesis optimisation over acidic hydrolysis of candelnutshell (Aleurites-moluccana).” J. Purifikasi 17, 77–86. https://doi.org/10.12962/j25983806.v17.i2.358
Ye, L., Han, Y., Wang, X., Lu, X., Qi, X., and Yu, H., 2021. “Recent progress in furfural production from hemicellulose and its derivatives: conversion mechanism, catalytic system, solvent selection.” Mol. Catal. 515, 111899. https://doi.org/10.1016/j.mcat.2021.111899
Yong, K.J., Wu, T.Y., Lee, C.B.T.L., Lee, Z.J., Liu, Q., Jahim, J.M., Zhou, Q., and Zhang, L., 2022. “Furfural production from biomass residues: Current technologies, challenges and future prospects.” Biomass and Bioenergy 161, 106458. https://doi.org/10.1016/j.biombioe.202.106458
Zhang, L.X., Yu, H., Yu, H.B., Chen, Z., and Yang, L., 2014. “Conversion of xylose and xylan into furfural in biorenewable choline chloride-oxalic acid deep eutectic solvent with the addition of metal chloride.” Chinese Chem. Lett. 25, 1132–1136. https://doi.org/10.1016/j.cclet.2014.03.029
Zou, Y., Fu, J., Chen, Z., and Ren, L., 2021. “The effect of microstructure on mechanical properties of corn cob.” Micron 146, 103070. https://doi.org/10.1016/j.micron.2021.103070
Copyright (c) 2025 ASEAN Journal of Chemical Engineering

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright holder for articles is ASEAN Journal of Chemical Engineering. Articles published in ASEAN J. Chem. Eng. are distributed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.
Authors agree to transfer all copyright rights in and to the above work to the ASEAN Journal of Chemical Engineering Editorial Board so that the Editorial Board shall have the right to publish the work for non-profit use in any media or form. In return, authors retain: (1) all proprietary rights other than copyright; (2) re-use of all or part of the above paper in their other work; (3) right to reproduce or authorize others to reproduce the above paper for authors’ personal use or for company use if the source and the journal copyright notice is indicated, and if the reproduction is not made for the purpose of sale.