Synthesis of Polylactic Acid from Apple, Pineapple, and Potato Residues
Abstract
Polylactic acid (PLA), a recyclable and biodegradable polymer, is essential for bioplastic production. Driven by the growing need for sustainable alternatives to petroleum-based plastics and the pressing issue of global food waste, PLA emerges as a promising biodegradable polymer derived from renewable resources such as sugarcane, corn, and biomass. Food waste presents a significant opportunity to produce PLA. While the conversion of food waste into lactic acid (LA), the PLA precursor, has been extensively studied, the subsequent transformation into PLA remains relatively unexplored. This research gap underscores the need for comprehensive investigations to understand the properties, production efficiency, and overall feasibility of producing PLA from food waste. This study aimed to produce PLA from food waste-derived LA. Apple, pineapple, and potato residues, rich in carbohydrates, served as substrates for LA fermentation using Lactobacillus Casei. The resulting LA was polymerized into PLA via ring-opening polymerization (ROP) using zinc oxide and tin (II) 2-ethylhexanoate as catalysts. Fourier Transform Infrared Chromatography (FTIR) confirmed the presence of LA in the fermentation broth, with the carbonyl and hydroxyl groups detected and LA appearing at peak 2.45 minutes in High-Performance Liquid Chromatography (HPLC). Apple residue yielded the highest LA percentage (31.36%), followed by pineapple (23.41%) and potato (20.81%). FTIR also indicated PLA formation due to the carbonyl group being slightly higher and the hydroxyl group being slightly lower than LA. Gel Permeation Chromatography (GPC) results showed potato residue produced PLA with a significantly higher molecular weight (12,662) compared to apple (543). Notably, apple residue PLA exhibited desirable monodisperse properties, which are advantageous for food packaging applications. This study demonstrates the potential of transforming food waste into valuable bioplastics, contributing to waste reduction and environmental sustainability.
References
Chandegara, V., Kumpavat, M. T., and Patel, K., 2015. “Plastic packaging waste impact on climate change and its mitigation.” Proceeding of National Seminar on Water Management and Climate Smart Agriculture, 13-14 February 2015, Gujarat, India.
Nawaz, A., Mechal, Q., Francis, N., Tahir, A., Mukhtar, H., and Ul Haq, I., 2017. “Lactic acid production using food waste.” International Journal of Engineering Research & Technology 6 (5), 1044-1050.
García Ibarra, V., Sendón, R., and Rodríguez-Bernaldo De Quirós, A., 2016. “Antimicrobial food packaging based on biodegradable materials.” Antimicrobial Food Packaging. Academic Press. pp. 363-384.
Ramli, N., Majid, H. A. M. A., Nawawi, W. N. W., Ishak, F. A. C., and Maarof, S., 2022. The “Antecedents of household acceptance on food waste innovation products in Terengganu.” Proceedings 82, 75. https://doi.org/10.3390/proceedings2022082075
Chua, G. K., Tan, F. H. Y., Chew, F. N., and Mohd-Hairul, A. R., 2019. “Nutrients content of food wastes from different sources and its pre-treatment.” AIP Conf. Proc. 2124, 020031. https://doi.org/10.1063/1.5117091
Abedi, E., and Hashemi, S. M. B., 2020. “Lactic acid production – producing microorganisms and substrates sources-state of art.” Heliyon 6 (10), e04974. https://doi.org/10.1016/j.heliyon.2020.e04974
Manandhar, A., and Shah, A., 2020. “Techno-economic analysis of bio-based lactic acid production utilizing corn grain as feedstock”. Processes 8 (2), 199. https://doi.org/10.3390/pr8020199
Ana, I. P-G., Jerson, G-C., Silvia, G-R. and Rebeca, D-A., 2024. “Optimization of lactic acid production from apple and tomato pomaces by thermotolerant bacteria.” J. Environ. Manag. 366, 121806. https://doi.org/10.1016/j.jenvman.2024.121806
Beatriz, G., Remedios, Y., Jose, L.A. and Parajo, J.C., 2024. “L-lactic acid production from apple pomace by sequential hydrolysis and fermentation.” Bioresour. Tech. 99(2), 308-319. https://doi.org/10.1016/j.biortech.2006.12.018
Tsapekos, P., Alvarado-Morales, M., Baladi, S., Bosma, E. F., and Angelidaki, I., 2020. “Fermentative production of lactic acid as a sustainable approach to valorize household bio-waste.” Frontiers in Sustainability 1 (4), 1-12. https://doi.org/10.3389/frsus.2020.00004
Wang, Q., Li, H., Feng, K., and Liu, J., 2020. “Oriented fermentation of food waste towards high-value products: A review.” Energies 13(21), 5638. https://doi.org/10.3390/en13215638
Ma, B., Yuan, Y., Gao, M., Li, C., Ogutu, C., Li, M., and Ma, F., 2018. “Determination of predominant organic acid components in malus species: Correlation with apple domestication.” Metabolites 8(4), 74. https://doi.org/10.3390/metabo8040074
Paramithiotis, S., Stasinou, V., Tzamourani, A., Kotseridis, Y., and Dimopoulou, M., 2022. “Malolactic fermentation - Theoretical advances and practical considerations.” Fermentation 8(10), 521. https://doi.org/10.3390/fermentation8100521
Nyiavuevang, B., Sodkampang, S., Dokmaikun, S., Thumanu, K., Boontawan, A., and Junpirom, S., 2022. “Effect of temperature and time for the production of polylactic acid without initiator catalyst from lactide synthesized from ZnO powder catalyst.” J. Phys.: Conf. Ser. 2175, 012042. https://doi.org/10.1088/1742-6596/2175/1/012042
Eromosele, I. C., Pepper, D. C., and Ryan, B., 1989. “Water effects the zwitterionic polymerization of cyanoacrylates. Makromol.” Die makromolekulare Chemie 190, 1613–1622. https://doi.org/10.1002/macp.1989.021900713
Hyon, S. H., Jamshidi, K., and Ikada, Y., 1997. “Synthesis of polylactides with different molecular weights”. Biomaterials 18(22), 1503–1508. https://doi.org/10.1002/macp.1989.021900713
Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., and Bikiaris, D. N., 2021. “Poly(lactic acid): A versatile biobased polymer for the future with multifunctional properties applications”. Polymers 13(11), 1822. https://doi.org/10.3390/polym1311182
Yang, Y., Zhang, M., Ju, Z., Tam, P. Y., Hua, T., Younas, M. W., Kamrul, H., and Hu, H., 2021. “Poly(lactic acid) fibers, yarns and fabrics: Manufacturing, properties and applications.” Text. Res. J. 91(13–14), 1641–1669. https://doi.org/10.1177/0040517520984101
Ali, Z. A., Niamah, A. K., and Widad Salih, H. 2021. “Isolation, preparation and characterization of polylactic acid film reinforced with nano silica.” J. Phys.: Conf. Ser. 2063(1), 012028. https://doi.org/10.1088/1742-6596/2063/1/012028.
Copyright (c) 2025 ASEAN Journal of Chemical Engineering

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright holder for articles is ASEAN Journal of Chemical Engineering. Articles published in ASEAN J. Chem. Eng. are distributed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.
Authors agree to transfer all copyright rights in and to the above work to the ASEAN Journal of Chemical Engineering Editorial Board so that the Editorial Board shall have the right to publish the work for non-profit use in any media or form. In return, authors retain: (1) all proprietary rights other than copyright; (2) re-use of all or part of the above paper in their other work; (3) right to reproduce or authorize others to reproduce the above paper for authors’ personal use or for company use if the source and the journal copyright notice is indicated, and if the reproduction is not made for the purpose of sale.