Analisis Sistem Kelistrikan pada Beban Motor Mesin Pencacah Sampah Plastik

https://doi.org/10.22146/juliet.v2i1.61278

Yanolanda Suzantry Handayani(1*), Junas Haidi(2), Agun Mardian(3)

(1) Universitas Bengkulu, Indonesia
(2) Universitas Bengkulu
(3) Universitas Bengkulu
(*) Corresponding Author

Abstract


In this modern era, the activities of almost all humans depend on machines they make, such as single-phase induction electric motors, which are used to chop plastic waste. This chopping machine aims to help plastic collectors process plastic waste into small pieces, making it easier to pack and ship plastic out of the area for reprocessing. The plastic waste shredding machine is made using a crushing system with a fan-shaped blade construction consisting of 39 blades divided by two rotating rows opposite the cover box using a chain motor gear transmission element. Most of the chopper machines on the market use engines with diesel or diesel fuel, therefore a chopper machine using an electric motor is designed to compare the motor power without the addition of capacitors and capacitors. The waste load used for motors without additional capacitors, medium and large bottles measuring 375 ml to 1500 ml, the machine can chop as much as 800 grams with the highest measurement of power 578.0 Watt, current 4.192 A, the lowest motor speed measurement is 1414 rpm and the reducer speed is 22.9 rpm . The waste load used for motors with additional capacitors, medium and large bottles measuring 375 ml to 1500 ml, the machine can chop 1000 grams with the highest measurement of power 732.7 Watt, current 4.149 A, the lowest motor speed measurement is 1464 rpm and the reducer speed is 22.9 rpm.


Full Text:

PDF


References

[1] Ichlas Nur, Junaidi, Adriansyah, "PENGEMBANGANSISTEM TRANSMISI PADAMESIN PENCACAHSAMPAH/LIMBAH PLASTIK DENGAN SISTEMCRUSHERDANSILINDER PEMOTONG TIPEREEL," National Conference of Applied Sciences, Engineering, Business and Information Technology. Politeknik Negeri Padang, vol. 2, no. 11, pp. 198-206, 2016.

[2] Mochamad Syamsiro, Arip Nur Hadiyanto, Zahrul Mufrodi, "Rancang Bangun Mesin Pencacah Plastik Sebagai Bahan Baku Mesin Pirolisis Skala Komunal," Jurnal Mekanika dan Sistem Termal (JMST), vol. 1, no. 2, pp. 43-48, 2016.

[3] Robert Napitupulu, Subkhan, Lestary Dwi Nita, "Rancang Bangun Mesin Pencacah Sampah Plastik," Jurnal Manutech, vol. 6, no. 2, pp. 1-5, 2014.

[4] Ahmad Dani , Muhammad Hasanuddin2, "PERBAIKAN FAKTOR DAYA MENGGUNAKAN KAPASITOR," Seminar Nasional Royal (SENAR) 2018, vol. 1, no. 2, p. 673 – 678, 2018.

[5] MA Sumanto, Motor Listrik Arus Bolak-Balik, Yogyakarta: Andi Offset, 1993.



DOI: https://doi.org/10.22146/juliet.v2i1.61278

Article Metrics

Abstract views : 309 | views : 235

Refbacks

  • There are currently no refbacks.