Early Warning Detection for Pulverizer Abnormalities Unit 2 Suralaya PGU 1 × 400 MW with Noise Spectrum Analysis

https://doi.org/10.22146/jmdt.102261

Firlan Maulana Ruaz(1*)

(1) PT. PLN Indonesia Power Suralaya Power Generation Unit, Suralaya, Indonesia
(*) Corresponding Author

Abstract


The coal pulverizer/mill abnormalities in coal power plants significantly affect the corporation’s reliability level. This paper introduces an early warning system for detecting pulverizer/mill abnormalities, specifically in PT PLN Indonesia Power's Suralaya PGU Unit 2 1x400 MW. Acoustic data from pulverizer 2E in Unit 2 of PT PLN Indonesia Power's Suralaya PGU were collected between September 2022 and September 2023. This dataset was acquired through recording devices and subsequently processed and visualized using MATLAB with the establishment of upper and lower threshold values based on recorded data during periods when the pulverizer is inoperative and when the pulverizer exhibits abnormal sound patterns. This paper reveals a correlation between increased sound abnormalities and the cumulative operational hours of the pulverizer. The results underscore that as the pulverizer operational hours accumulate, vibrations become more occurred. This paper introduces a novel approach to pulverizer/mill maintenance from the conventional strategy of interval-based maintenance every 3000 operating hours of the pulverizer, to a real- time graph-based strategy using data processed with MATLAB. This approach proposes a comprehensive enhancement of maintenance strategy within coal power plant pulverizers.

Keywords


Condition monitoring; pulverizer; MATLAB; sound spectrum

Full Text:

PDF


References

V. Agrawal, B.K. Panigrahi, P.M.V. Subbarao, ”Review of control and fault diagnosis methods applied to coal mills”, Journal of Process Control, Volume 32, Pages 138-153, 2015. https://doi.org/10.1016/j.jprocont.2015.04.00

Venkatesh, Satvik & Moffat, David & Miranda, Eduardo, “You Only Hear Once: a Yolo- like Algorithm for Audio Segmentation and Sound Event Detection”, Applied Sciences, 12, 2022. 3293. 10.3390/app12073293.

Zhang, George & Thulen, Paul, “Coal Pulverizer Monitoring and Analysis: A Case Study. American Society of Mechanical Engineers”, Power Division (Publication) PWR., 2006. 10.1115/POWER2006-88095.

Hershey, S.; Ellis, D.P.; Fonseca, E.; Jansen, A.; Liu, C.; Moore, R.C., “Plakal, M. The benefit of temporally-strong labels in audio event classification”, In Proceedings of the IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), Toronto, ON, Canada, 6–11 June 2021; pp. 366–370

Gulati, Karan & Basandrai, Keshav & Tiwari, Shubham & Kamat, Pooja & Dr, Kumar, “Predictive maintenance of bearing machinery using simulation- a bibliometric study”, 2021.

Szolc, Tomasz & Jankowski, Łukasz & Pochanke, Andrzej & Michajłow, Maciej, “Vibration control of the coal pulverizer geared drive system using linear actuators with the magneto- rheological fluid, 2011.

Ghazali, Mohamad & Rahiman, Wan, “Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review”, Shock and Vibration. 2021. 1-25. 10.1155/2021/9469318.

Chini, Farshid & Rahimzadeh, Hassan & Bahrami, Mohsen, “Cavitation Detection of a Centrifugal Pump Using Noise Spectrum”, 2005. 10.1115/DETC2005-84363.

Manish Vishwakarma, Rajesh Purohit, V. Harshlata, P. Rajput, “Vibration Analysis & Condition Monitoring for Rotating Machines: A Review, Materials Today”, Proceedings, Volume 4, Issue 2, Part A, 2017, Pages 2659-2664, ISSN2214-7853, 10.1016/j.matpr.2017.02.140.

Hamomd, O, “Compound Fault Diagnosis of Centrifugal Pumps Using Vibration Analysis Techniques”, The University of Huddersfield, School of Computing and Engineering, 2018.



DOI: https://doi.org/10.22146/jmdt.102261

Article Metrics

Abstract views : 133 | views : 73

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.