Semi-Automatic 3D Modeling of Rooftop Types from Aerial Photos

https://doi.org/10.22146/jgise.98778

Arsa Fa'iz Nursyahrial(1), Hanif Ilmawan(2*)

(1) Department of Earth Technology, Vocational College, Universitas Gadjah Mada
(2) Department of Earth Technology, Vocational College, Universitas Gadjah Mada
(*) Corresponding Author

Abstract


Urban planning has dynamic problem as time goes by. 3D City Model is one of solutions to help planners in decision making, because it can represent real objects in high detail, including the rooftop type. In this research, case study of 3D City Model located in the office area of Wonogiri Regency Government, which was processed from aerial photos using semi-automatic method with LoD 2 standart. This semi-automatic method used Computer Generated Architecture (CGA) rules that contained commands to create objects based on their input. The result was a 3D model of the building along with road and landscape. The roof shape of 3D building model was compared to aerial photos in order to evaluate the visual accuracy, specifically aiming for completeness, correctness, and accuracy values above 85%. The result showed that the flat and shed have the highest accuracy, while the gable roof has low accuracy, though they were all above 85% accuracy. This means that the semi-automatic method has potential for 3D modeling purpose in any kind of standart roof types.

Keywords


3D city, photogrammetry, nDSM, urban planning, Computer Generated Architecture

Full Text:

PDF


References

Andaru, R., Aditya, T., Cahyono, B. K., Santosa, P. B., Yulaikhah, Swastika, S. P. (2024). Automatic DTM and Building Footprint Extraction from Imageries and Point Clouds in Indonesia’s Land Registration Drone Survey: A Roadmap Towards Reconstruction of LOD1 3D building model. 12th International FIG Land Administration Domain Model & 3D Land Administration Workshop, 24-26 September 2024, Kuching, Malaysia. https://www.gdmc.nl/3DCadastres/workshop2024/programme/3DLA2024_paper_D.pdf

Badwi, I. M., Ellaithy, H. M., & Youssef, H. E. (2022). 3D-GIS Parametric Modelling for Virtual Urban Simulation Using CityEngine. Annals of GIS, 28(3), 325–341. https://doi.org/10.1080/19475683.2022.2037019

Bieda, A., Bydłosz, J., Parzych, P., Pukanská, K., & Wójciak, E. (2020). 3D technologies as the future of spatial planning: The example of Krakow. Geomatics and Environmental Engineering, 14(1), 15–33. https://doi.org/10.7494/geom.2020.14.1.15

Biljecki, F. (2017). Level of detail in 3D city models [TU Delft]. https://doi.org/https://doi.org/10.4233/f12931b7-5113-47ef-bfd4-688aae3be248

Biljecki, F., Stoter, J., Ledoux, H., Zlatanova, S., & Çöltekin, A. (2015). Applications of 3D city models: State of the art review. ISPRS International Journal of Geo-Information, 4(4), 2842–2889. https://doi.org/10.3390/ijgi4042842

Buyukdemircioglu, M., Kocaman, S., & Isikdag, U. (2018). Semi-automatic 3D city model generation from large-format aerial images. Canadian Historical Review, 7(9). https://doi.org/10.3390/ijgi7090339

Danilina, N., Slepnev, M., & Chebotarev, S. (2018). Smart city: Automatic reconstruction of 3D building models to support urban development and planning. MATEC Web of Conferences, 251. https://doi.org/10.1051/matecconf/201825103047

Firdaus, Z. M., Handayani, H. H., & Hidayat, H. (2020). Utilization of LiDAR Data and Aerial Photos for Three-Dimensional City Modeling (Case Study: West Surabaya Region). Geoid, 16(1), 80–92.

Foody, G. M. (2002). Status of land cover classification accuracy assessment. Remote Sensing of Environment, 80, 185–201. www.elsevier.com/locate/rse

Heipke, C., Mayer, H., Wiedemann, C., & Jamet, O. (1997). Evaluation of Automatic Road Extraction. International Archives of Photogrammetry and Remote Sensing, 32, 151–160.

Herbert, G., & Chen, X. (2015). A comparison of usefulness of 2D and 3D representations of urban planning. Cartography and Geographic Information Science, 42(1), 22–32. https://doi.org/10.1080/15230406.2014.987694

Jang, Y. J., Oh, J. H., & Lee, C. N. (2020). Urban Building Change Detection Using nDSM and Road Extraction. Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, 38(3), 237–246.

Kelly, T. (2021). CityEngine: An Introduction to Rule-Based Modeling. In Urban Book Series (pp. 637–662). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-981-15-8983-6_35

Pađen, I., García-Sánchez, C., & Ledoux, H. (2022). Towards automatic reconstruction of 3D city models tailored for urban flow simulations. Frontiers in Built Environment, 8. https://doi.org/10.3389/fbuil.2022.899332

Peraturan Badan Informasi Geospasial Nomor 18 Tahun 2021 Tentang Tata Cara Penyelenggaraan Informasi Geospasial, Badan Informasi Geospasial (2021). https://peraturan.bpk.go.id/Details/217091/peraturan-big-no-18-tahun-2021

Peters, R., Dukai, B., Vitalis, S., van Liempt, J., & Stoter, J. (2022). Automated 3D Reconstruction of LoD2 and LoD1 Models for All 10 Million Buildings of the Netherlands. Photogrammetric Engineering and Remote Sensing, 88(3), 165–170. https://doi.org/10.14358/PERS.21-00032R2

Raven, J., Leone, M. F., Mills, G., Katzschner, L., Gaborit, P., Georgescu, M., Hariri, M., & Stone, B. (2018). Urban planning and urban design. In Climate Change and Cities (ARC 3-2). Second Assessment Report of the Urban Climate Change Research Network (pp. 139–172). Cambridge Univesity Press.

Trikusuma, F., Prasetyo, Y., & Hadi, F. (2021). Pemodelan 3 (Tiga) Dimensi Bangunan Menggunakan Foto Udara Format Kecil (Studi Kasus: Fakultas Teknik, Universitas Diponegoro). Jurnal Geodesi UNDIP, 10(2), 1–10.

Udoh, U. P., Essien, A. U., & Etteh, D. I. (2020). The Importance of Urban Design and Sustainable Urban Transformation in Nigeria. IOSR Journal Of Humanities And Social Science (IOSR-JHSS, 25(6). https://doi.org/10.9790/0837-2506060107

Uggla, M., Olsson, P., Abdi, B., Axelsson, B., Calvert, M., Christensen, U., Gardevärn, D., Hirsch, G., Jeansson, E., Kadric, Z., Lord, J., Loreman, A., Persson, A., Setterby, O., Sjöberger, M., Stewart, P., Rudenå, A., Ahlström, A., Bauner, M., … Harrie, L. (2023). Future Swedish 3D City Models—Specifications, Test Data, and Evaluation. ISPRS International Journal of Geo-Information, 12(2). https://doi.org/10.3390/ijgi12020047

Willenborg, B., Sindram, M., & Kolbe, T. H. (2018). Applications of 3D City Models for a better understanding of the Built Environment. In M. Behnisch & G. Meinel (Eds.), Trends in Spatial Analysis and Modelling (Vol. 19, pp. 167–191). Springer, Cham. https://doi.org/https://doi.org/10.1007/978-3-319-52522-8_9

Winsemius, S., & Braaten, J. (2024). Zonal Statistics. In Cloud-Based Remote Sensing with Google Earth Engine (pp. 463–485). Springer International Publishing. https://doi.org/10.1007/978-3-031-26588-4_24

Zheng, Y., Weng, Q., & Zheng, Y. (2017). A hybrid approach for three-dimensional building reconstruction in indianapolis from LiDAR data. Remote Sensing, 9(4). https://doi.org/10.3390/rs9040310



DOI: https://doi.org/10.22146/jgise.98778

Article Metrics

Abstract views : 1763 | views : 875

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.


Journal of Geospatial Information Science and Engineering (JGISE) ISSN: 2623-1182 (Online) Email: jgise.ft@ugm.ac.id The Contents of this website is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.