Characterization of Electromagnetic Wave Absorbers with Broadside SRR Method on C-Band

Dwi Banyu Prawito; Rasheed Abdurrahman Mulyadi; Budi Syihabuddin; Levy Olivia Nur

doi:10.22146/ijitee.50933

Characterization of Electromagnetic Wave Absorbers with Broadside SRR Method on C-Band

https://doi.org/10.22146/ijitee.50933

Dwi Banyu Prawito^(1*), Rasheed Abdurrahman Mulyadi⁽²⁾, Budi Syihabuddin⁽³⁾, Levy Olivia Nur⁽⁴⁾

(1) Telkom University
(2) Telkom University
(3) Telkom University
(4) Telkom University
(*) Corresponding Author

Abstract

Electromagnetic wave absorber is a material that can reduce the energy available in electromagnetic waves. Electromagnetic wave absorber can be used to reduce interference in wireless communication devices so as not to quickly suffer damage, as a layer in the room free of reflection and to reduce radar cross section of an object detected in radar tracking applications. In this paper, a discussion about the use of the broadside form using the Split Ring Resonator (SRR) method as an absorber of electromagnetic waves and its characteristics in C-Band. Broadside shape is obtained from the initial form of a square which is developed into a square resonator and then given a gap at the end of the resonator. The results show that the SRR broadside form can be used as an absorbent of electromagnetic waves on the C-Band, precisely the frequency of 6.41 GHz with absorption rates reaching 99.99% and bandwidth of 0.077 GHz with dimensions of 7 mm. From the experimental results, it can also be seen that the change in the gap length variable in the SRR broadside shape is the most influential in changing the resonant frequency value and the amount of bandwidth produced.

Keywords

Electromagnetic Wave Absorbers; SRR; Broadside SRR; C-Band

Full Text:

PDF

References

L.O. Nur, A. Munir, Sugihartono, and A. Kurniawan, “Perancangan dan Fabrikasi Penyerap Gelombang Elektromagnetik Patch Segi Enam Berbasis Surface Textured,” Jurnal Penelitian dan Pengembangan Telekomunikasi, Kendali, Komputer, Elektrik, dan Elektronika, Vol. 1, No. 1, pp. 40-45, 2016.

L.O. Nur and A. Munir, "Thin EM Wave Absorber Composed of Octagonal Patch Array and Its Characteristic Measurement," 2015 3rd International Conference on Information and Communication Technology (ICoICT), 2015, pp. 604-607.

J. Tak and J. Choi, "A Wearable Metamaterial Microwave Absorber," IEEE Antennas and Wireless Propagation Letters, Vol. 16, pp. 784-787, 2017.

H.B. Baskey and M.J. Akhtar, "A Dual-band Hexagonal Ring Based Polarization-insensitive Metamaterial Absorber," IEEE MTT-S International Microwave and RF Conference, 2013, pp. 1-4.

Y. Ze and L. Gui-Zen, “An Ultra-thin and Broadband Absorber Using Slotted Metal Loop with Multi Layers,” Optik, Vol. 127, No. 1, pp. 387-389, 2016.

N. Engheta and R.O. Ziolkowski, Metamaterials Physics and Engineering Explorations, Ottawa, Canada: John Wiley & Sons, Inc., 2006.

D. Chaurasiya, S. Ghosh, and K.V. Srivastava, "Dual Band Polarizationinsensitive Wide Angle Metamaterial Absorber for Radar Application," 2014 44th European Microwave Conference, 2014, pp. 885-888.

K. Srivastava, A. Kumar, A.K. Verma, and Q. Zhang, "Quad-band Polarization Independent Ultra-thin Microwave Absorber Using Metamaterial," 2015 39th National Systems Conference (NSC), 2015, pp. 1-4.

J. Tak, Y. Jin, and J. Choi, "A Dual‐band Metamaterial Microwave Absorber," Microw. Opt. Technol. Lett., Vol. 58, No. 9, pp. 2052-2057, 2016.

A.K. Singh, M.P. Abegaonkar, and S.K. Koul, "Penta Band Polarization Insensitive Metamaterial Absorber for EMI/EMC Reduction and Defense Applications," 2017 IEEE MTT-S International Microwave and RF Conference (IMaRC), 2017, pp. 1-5.

P.Z. Peebles, Radar Principles, New York, USA: John Wiley and Sons, Inc., 1998.

G. Maral and M. Bousquet, Satellite Comunications Systems, New York, USA: John Wiley and Sons, Inc., 2010.

W. Chen and M. Liang, "LTE/5G C-band MIMO Antennas for Laptop Computers," 2018 International Symposium on Antennas and Propagation (ISAP), 2018, pp. 1-2.

K. Schubert, W. Jens, and F. Schwartau, “Design of an Bi-static C-band Radar for Characterisation of Wind Turbine Plants,” Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC), 2017, pp. 7-9.

L.O. Nur, A. Kurniawan, Sugihartono, and A. Munir, “Theoretical Analysis of Resonant Frequency for AMC-based Absorber Composed of Square Patch Array,” International Journal on Electrical Engineering and Informatics, Vol. 7, No. 2, pp. 284-296, 2015.

T.T. Nguyen and S. Lim, "Bandwidth Enhancement of Metamaterial Absorber Using Double Resonance," 2017 IEEE Asia Pacific Microwave Conference (APMC), Kuala Lumpur, 2017, pp. 380-382.

DOI: https://doi.org/10.22146/ijitee.50933