MAPPING THE DEGREE OF TECHNOLOGICAL CAPABILITY IN SMALL AND MEDIUM INDUSTRY OF AUTOMOTIVE COMPONENTS

https://doi.org/10.22146/ajse.v4i1.59066

Sella Antesty(1*), Alva Edy Tontowi(2), Arif Kusumawanto(3)

(1) Universitas Gadjah Mada
(2) Universitas Gadjah Mada
(3) 
(*) Corresponding Author

Abstract


The automotive industry is known to increase exports since 2015 and is predicted to continue to grow. To develop the industry, the government is known to issue several schemes, and one of them is in the form of mandatory rules for partnerships with the small and medium industrial sectors. However, there is no industrial, institutional map seen from various aspects, including technology, human resources, information, and organization. This map is essential and useful for stakeholders to develop the industry because it provides more directed assistance.

In this study, the small and medium industries for processing metal automotive components in Tegal City are used as mapping objects. The technometric method is used to calculate the level of technology contribution they have. The results of this study indicate that the four aspects covering Technoware, Humanware, Infoware, and Orgaware for small and medium-sized automotive component processing industries in Tegal City are in a reasonable range. For improvement or guidance, production facility technology is the priority. Then proceed to employee competencies, information systems, and organizational management. Mapping should be done regularly every five years or less than five years as an evaluation.


Full Text:

PDF


References

Adiantoro, B. (2019). Analisis Kemampuan Teknologi PT X dengan Pendekatan Teknometrik dan Analytical Network Process ( ANP ). Jurnal Maritim Indonesia, 7, 176–185. Anggariawan, Y. P., Syamsuri, & Prabowo, R. (2019). Analisis Technology Content Assesment Pada Lembaga Pendidikan Menggunakan Metode Teknometrik. Jurnal Seniati, ISSN 2085-4218, 243–249. Bank Indonesia. (2019a). Kajian Ekonomi dan Keuangan Regional. In Laporan Nusantara. https://doi.org/10.1109/ICICISYS.2009.5358151 Bank Indonesia. (2019b). Perkembangan Baki Debet Kredit Usaha Mikro , Usaha Kecil , dan Usaha Menengah ( UMKM ) PERBANKAN. II . 1(November 2015), 1–3. Dinas Koperasi UMKM & Perdagangan RI. (2019). Perkembangan Data Usaha Mikro , Kecil , Menengah Dan Usaha Besar. In Www.Depkop.Go.Id (Vol. 2000, Issue 1). Giyanti, I. (2015). Penilaian Tingkat Kontribusi Teknologi pada Perusahaan Jasa Menggunakan Model Teknometrik. Jurnal Ilmiah Teknik Industri Dan Informasi, 3(2), 93–106. Kementerian Koperasi dan Kecil dan Menengah Republik Indonesia. (2019). Sinergitas Pengembangan KUMKM melalui Penguatan Peran Antar Lembaga. Kementerian KUKM RI. Lungari, F. F. (2017). Analisis Kesiapan Komponen Teknologi ( Humanware ) di Galangan Kapal Menengah ( Studi Kasus PT Adiluhung Sarana Segara Indonesia ). Jurnal Ilmiah Tindalung, 3(1), 31–35. https://doi.org/10.5281/jit.v3i1.97 Matin, Y. A., & Toloui, A. (2014). Measuring technological level and capability of the industries in East Azerbaijan and providing proper strategies for improvement and promotion of technology. Advances in Environmental Biology, 8(25), 408–413. Presidential Regulation of the Republic of Indonesia Number 44, (2016) Pujianto, T., Hasbullah, R. A. S., & Ardiansah, I. (2017). Penilaian Kontribusi Komponen Teknologi dalam Aktivitas Produksi di PT Z Menggunakan Metode Teknometrik Assessment of Contribution of Technology Components in Production Activities. Industria: Jurnal Teknologi Dan Manajemen Agroindustri, 6(3), 133–144. Purwaningsih, R., Prastawa, H., & R, F. Z. (2005). Penilaian Teknologi Dengan Metode Teknometrik DI PT. INDO ACIDATAMA CHEMICAL INDUSTRY SOLO. Jurnal Transistor, 5(1), 12–20. Rahmani, K., Behravesh, M., Behravesh, M., Karegar, N., & Fereidooni, A. (2010). Examining The Level and Strength of Technology in The Industries of The Country Iran by Using Escap Model and Introducing Solutions For Developing Technology. Australian Journal of Basic and Applied Sciences, 4(10), 4638–4649. Regina Ambar Ayu. (2018). Analisis Kontribusi Komponen Teknologi Dalam Pengembangan Pertanian Padi Konvensional Menuju Organik Dan Pengaruhnya Terhadap Produksi Padi Dan Produksi, Produktivitas Dan Pendapatan Usahatani di Kecamatan Sambirejo, Kabupaten Sragen. UNIVERSITAS PEMBANGUNAN NASIONAL. Yogyakarta Retnowati, N., & Mayasari, F. (2016). Contribution Assessment of Technology Component at PDP KAHYANGAN Kabupaten Jember. Jurnal Ilmiah Inovasi, 1(3), 193–199. Rumanti, A. A., & Hadisurya, V. (2017). Analysis of Innovation based on Technometric Model to Predict Technology Life Cycle in Indonesian SME. International Journal of Innovation in Enterprise System, 1(01), 29–36. https://doi.org/10.25124/ijies.v1i01.7 Sato, Y. (2000). How did the crisis affect small and medium-sized enterprises? From a field study of the metal-working industry in Java. Developing Economies, 38(4), 572–595.https://doi.org/10.1111/j.1746-1049.2000.tb00891.x Smith, R., & Sharif, N. (2007). Understanding and acquiring technology assets for global competition. Technovation, 27(11), 643–649. https://doi.org/10.1016/j.technovation.2007.04.001 Sulistiyowati, W., & Jakaria, R. B. (2018). Assessment of technology content level with integrated technometrics and Analytical Hierarchy Process (AHP) methods in small and medium enterprises. IOP Conference Series: Materials Science and Engineering, 434(1), 1–10. https://doi.org/10.1088/1757-899X/434/1/012246 Undang Undang No. 20 Tahun 2008. (2008). UU No. 20 Tahun 2008. UU No. 20 Tahun 2008, 1, 1–31. Utomo, S., & Setiastuti, N. (2019). Penerapan Metode Technometrik Untuk Penilaian Kapabilitas Teknologi Industri Galangan Kapal Dalam Menyongsong Era Industri 4.0. J-SAKTI (Jurnal Sains Komputer Dan Informatika), 3(1), 100.https://doi.org/10.30645/j-sakti.v3i1.105 Wahyuni, H. C., Hartati, V., & Astuti, M. (2016). Model Adopsi Teknologi Dalam Rangka Peningkatan Kualitas Produk Pada Usaha Kecil Dan Menengah (Ukm) Di Kabupaten Sidoarjo. Spektrum Industri, 14(2), 189. https://doi.org/10.12928/si.v14i2.4911 Warafakih, A. S., Chumaidiyah, E., & Aurachman, R. (2015). Analisis Kandungan Teknologi 3G Pada Layanan TELKOMSEL FLASH Dengan Metode Teknometrik di PT . TELKOMSEL JAKARTA SELATAN. Proceeding of Engineering, 2(2), 4124–4131. Yanthi, E. R., Basith, A., & Munandar, J. M. (2018). Analisis Kontribusi Komponen Teknologi pada Perusahaan Jasa Kereta Api Barang dengan Pendekatan Model Teknometrik. Jurnal Manajemen Teknologi, 17(3), 197–215. https://doi.org/10.12695/jmt.2018.17.3.3



DOI: https://doi.org/10.22146/ajse.v4i1.59066

Article Metrics

Abstract views : 1210 | views : 1622

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 ASEAN Journal of Systems Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.


ASEAN Journal of Systems Engineering (AJSE) 
P-ISSN: 2338-2309 || E-ISSN: 2338-2295
Master in Systems Engineering
Faculty of Engineering
Universitas Gadjah Mada
Jl. Teknika Utara No.3, Barek, Yogyakarta, Indonesia 55281 
Website: https://journal.ugm.ac.id/ajse
Email: jurnalajse@gmail.com | ajse@ugm.ac.id