Plasma-Enhanced Chemical Vapor Deposition of Indene for Gas Separation Membrane

https://doi.org/10.22146/ajche.50874

Myat Kyaw(1*), Shinsuki Mori(2), Nathaniel Dugos(3), Susan Roces(4), Arnel Beltran(5), Shunsuke Suzuki(6)

(1) Department of Chemical Engineering, Mandalay Technological University, Mandalay 05072, Myanmar; Chemical Engineering Department, De La Salle University, 2401 Taft Ave, Manila 0922, Philippines
(2) Department of Chemical Engineering, Tokyo Institute of Technology, Tokyo 152-8552, Japan
(3) Chemical Engineering Department, De La Salle University, 2401 Taft Ave, Manila 0922, Philippines
(4) Chemical Engineering Department, De La Salle University, 2401 Taft Ave, Manila 0922, Philippines
(5) Chemical Engineering Department, De La Salle University, 2401 Taft Ave, Manila 0922, Philippines
(6) Department of Chemical Engineering, Tokyo Institute of Technology, Tokyo 152-8552, Japan
(*) Corresponding Author

Abstract


Polyindene (PIn) membrane was fabricated onto a zeolite 5A substrate by using plasma-enhanced chemical vapor deposition (PECVD) at low temperature. Membrane characterization was done by taking Scanning Electron Microscopy (SEM) and FT-IR measurements and the new peak was found in the plasma-derived PIn film. Membrane performance was analyzed by checking permeability of pure gases (H2, N2, and CO2) through the membrane. PECVD-derived PIn membrane showed high gas barrier properties and selectivities of 8.2 and 4.0 for H2/CO2 and H2/N2, respectively, at room temperature


Keywords


Indene, Carbon membrane, PECVD, Gas separation

Full Text:

PDF


References

  1. Abdul Karim, S. M., Nomura, R., and Masuda, T. (2002). "Cationic copolymerization of indene with styrene derivatives: Synthesis of random copolymers of indene with high molecular weight," Journal of Polymer Science, Part A: Polymer Chemistry, 40(14), 2449–2457.
  2. Brum, F. J. B., Laux, F. N., and Forte, M. M. C. (2013). "Synthesis of hydrocarbon polymers by cationic polymerization and their thermal properties. Designed Monomers and Polymers," 16(3), 291–301.
  3. Goel, S., Mazumdar, N. A., and Gupta, A. (2010). "One-dimensional nanofibers of polyindene: Synthesis and characterization," Journal of Polymer Research, 17(5), 639–645.
  4. Haider, S., Lindbråthen, A., Lie, J. A., Andersen, I. C. T., and Hägg, M. B. (2018). "CO2 separation with carbon membranes in high pressure and elevated temperature applications," Separation and Purification Technology, 190, 177–189.
  5. Ismail, A. F., and Li, K. (2008). "From Polymeric Precursors to Hollow Fiber Carbon and Ceramic Membranes," Membrane Science and Technology, 13(07), 81–119.
  6. Kafrouni, W., Rouessac, V., Julbe, A., and Durand, J. (2009). "Synthesis of PECVD a-SiCXNY:H membranes as molecular sieves for small gas separation," Journal of Membrane Science, 329(1–2), 130–137.
  7. Li, X., and Huang, M. (1997). "Multilayer ultrathin-film composite membranes for oxygen enrichment," Journal of Applied Polymer Science, 66(11), 2139–2147.
  8. Nagasawa, H., Kanezashi, M., Yoshioka, T., and Tsuru, T. (2016). "Plasma-enhanced chemical vapor deposition of amorphous carbon molecular sieve membranes for gas separation," RSC Advances, 6(64), 59045–59049.
  9. Nagasawa, H., Yamamoto, Y., Tsuda, N., Kanezashi, M., Yoshioka, T., and Tsuru, T. (2017). "Atmospheric- pressure plasma-enhanced chemical vapor deposition of microporous silica membranes for gas separation," Journal of Membrane Science, 524, 644–651.
  10. Roualdes, S., Sanchez, J., and Durand, J. (2002). "Gas diffusion and sorption properties of polysiloxane membranes prepared by PECVD," Journal of Membrane Science, 198(2), 299–310.
  11. Semenova, S. I. (2004). "Polymer membranes for hydrocarbon separation and removal," Journal of Membrane Science, 231(1–2), 189– 207.
  12. Tseng, H. H., Wang, C. T., Zhuang, G. L., Uchytil, P., Reznickova, J., and Setnickova, K. (2016). "Enhanced H2/CH4 and H2/CO2 separation by carbon molecular sieve membrane coated on titania modified alumina support: Effects of TiO2 intermediate layer preparation variables on interfacial adhesion," Journal of Membrane Science, 510, 391–404.
  13. Vasudev, M. C., Anderson, K. D., Bunning, T. J., Tsukruk, V. V., and Naik, R. R. (2013). "Exploration of plasma- enhanced chemical vapor deposition as a method for thin-film fabrication with biological applications," ACS Applied Materials and Interfaces, 5(10), 3983–3994.
  14. Wang, Z., Li, P., Zhihua, Q., Liu, Y., Cao, X., Li, W., and Wang, S. (2015). "Recent developments in membranes for efficient hydrogen purification," Journal of Membrane Science, 495, 130–168.
  15. Yampolskii, Y. (2012). "Polymeric Gas Separation Membranes," Macro- molecules, 45(8), 3298–33.



DOI: https://doi.org/10.22146/ajche.50874

Article Metrics

Abstract views : 3160 | views : 2557

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.