Kinetic of CO2 Decomposition by Gliding Arc Plasma

https://doi.org/10.22146/ajche.50144

Antonius Indarto(1*), Jae-Wook Choi(2), Hwaung Lee(3), Hyung Keun Song(4)

(1) KoreaInstituteof Science andTechnology, Clean TechnologyResearch Center,P0.Box131, Cheongryang, Seoul 130-650, KOREA
(2) KoreaInstituteof Science and Technology,Clean TechnologyResearch Center,P0.Box131, Cheongryang, Seoul 13o-650, KOREA
(3) KoreaInstituteof Science and Technology,Clean TechnologyResearch Center,P0.Box131, Cheongryang, Seoul 13o-650, KOREA
(4) KoreaInstituteof Science andTechnology,Clean TechnologyResearch Center,P0.Box131, Cheongryang, Seoul 13o-650, KOREA
(*) Corresponding Author

Abstract


Decomposition of carbon dioxide (C02) by gliding arc plasma was examined. The plasma reactor was consisted of two triangles stainless steel plates which was connected to a 20 kV AC power supply. The gas entered through a nozzle tube from the upstream cylinder reactor and exit at the downstream of the reactor. The effect of total gas flow rates have been used to study the chemical process reaction in gliding plasma system. The model of active-chemical kinetic of C02 decomposition was built to explain the way of plasma reaction. Experiment results indicate the conversion of C02 reached 18% at the total gas flow rate of 1.5' 10.5m3s'1and produced CO and 02 as the main gaseous final products.

Keywords


Emulsioncopolymerization,PolymersPlusa,simulation,semibatchreactor,andstyrene/ butadiene.

Full Text:

PDF


References





DOI: https://doi.org/10.22146/ajche.50144

Article Metrics

Abstract views : 1696 | views : 970

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.