Production of Lipids from Municipal Sewage Sludge by Two Stage Extraction Process

https://doi.org/10.22146/ajche.49672

Bharathi P.(1*), Pennarsi M.(2)

(1) Department of Biotechnology,Karpaga Vinayaga College of Engg and Technology
(2) Department of Biotechnology,Karpaga Vinayaga College of Engg and Technology
(*) Corresponding Author

Abstract


In this investigation, municipal sewage sludge was used as a lipid feedstock. Two stage extraction processes was developed to obtain good yield of lipid content. The maximum lipid yields 32.5% was achieved from chloroform: methanol solvents through optimum conditions of 2:1 ratio, 50oC temp for 30 min. The lipid content was characterized by TLC analysis. The lipid properties were analyzed and proved as a lipid. Hence, municipal sewage sludge serves as a valuable raw material for lipid production

Keywords


lipids, municipal waste, sludge, solvent extraction

Full Text:

PDF


References

  1. Dufreche, S., Hernandez, R., French, T., Sparks. D., Zappi. M. and Alley. E. (2007). J Amer Oil Chem Soc., 84 181- 187.
  2. Fenfen, Z., Zhao, L., Zhang, Z. and Jiang H. (2012). Procedia Environmental Sciences., 16 352-356.
  3. Girisha, S.T., Ravikumar, K., Mrunalini, and Girish V. (2014). Journal of Experimental Biology., 4 242-249.
  4. Kargbo, D.M., (2010) Energy and Fuels., 24 2791-2794.
  5. Olkiewicz, M., Fortuny, A., Stuber, F., Fabregat A., Font, J. and Bengao, C. H (2012). Procedia Engineering., 42 634- 643.
  6. Samios, D. F., Pedrotti, A., Nicolau, Q. B., Reiznautt, D., Martini, D., and Dalcin, F. M., Fuel Processing Technology., 90 (2009) 599-605.
  7. Suehara, K., Yoshihiro, K., Eiko, F., Kohda, J., Nakano, Y., and Yano, T. (2005). Journal of bioscience and bioengineering., 100 437-442.



DOI: https://doi.org/10.22146/ajche.49672

Article Metrics

Abstract views : 7584 | views : 20169

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.